Details
Originalsprache | Englisch |
---|---|
Seiten (von - bis) | 146-153 |
Seitenumfang | 8 |
Fachzeitschrift | IET Science, Measurement and Technology |
Jahrgang | 2 |
Ausgabenummer | 3 |
Publikationsstatus | Veröffentlicht - Mai 2008 |
Abstract
Different approaches for the characterisation of relevant parameters of the low-voltage mains network, used for high-speed data transmission (BPL, broadband over power line) are described. Part 1 of the paper depicts the disturbance scenario of these BPL devices and the motivation will be given for the development of a new measurement procedure in CISPR for the estimation of the high-frequency characteristics of AC mains network. The improvements of the measurement method is not restricted to BPL applications, but can also be applied to other wire-based telecommunication systems. Part 2 of the paper shows the definitions and comparisons of different symmetry factors. The transfer of the results on the compliance test for BPL devices will be shown.
ASJC Scopus Sachgebiete
- Physik und Astronomie (insg.)
- Atom- und Molekularphysik sowie Optik
- Ingenieurwesen (insg.)
- Elektrotechnik und Elektronik
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
in: IET Science, Measurement and Technology, Jahrgang 2, Nr. 3, 05.2008, S. 146-153.
Publikation: Beitrag in Fachzeitschrift › Artikel › Forschung › Peer-Review
}
TY - JOUR
T1 - Electromagnetic compatibility analysis of unstructured mains networks for high-speed data transmission
T2 - Part 1
AU - Battermann, S.
AU - Garbe, H.
AU - Silva, F.
AU - Pous, M.
AU - Beauvois, V.
AU - Vantomme, K.
AU - Catrysse, J.
AU - Newbury, J.
AU - Degardin, V.
AU - Liénard, M.
AU - Degauque, P.
AU - Flintoft, I. D.
AU - Papatsoris, A. D.
AU - Welsh, D. W.
AU - Marvin, A. C.
PY - 2008/5
Y1 - 2008/5
N2 - Different approaches for the characterisation of relevant parameters of the low-voltage mains network, used for high-speed data transmission (BPL, broadband over power line) are described. Part 1 of the paper depicts the disturbance scenario of these BPL devices and the motivation will be given for the development of a new measurement procedure in CISPR for the estimation of the high-frequency characteristics of AC mains network. The improvements of the measurement method is not restricted to BPL applications, but can also be applied to other wire-based telecommunication systems. Part 2 of the paper shows the definitions and comparisons of different symmetry factors. The transfer of the results on the compliance test for BPL devices will be shown.
AB - Different approaches for the characterisation of relevant parameters of the low-voltage mains network, used for high-speed data transmission (BPL, broadband over power line) are described. Part 1 of the paper depicts the disturbance scenario of these BPL devices and the motivation will be given for the development of a new measurement procedure in CISPR for the estimation of the high-frequency characteristics of AC mains network. The improvements of the measurement method is not restricted to BPL applications, but can also be applied to other wire-based telecommunication systems. Part 2 of the paper shows the definitions and comparisons of different symmetry factors. The transfer of the results on the compliance test for BPL devices will be shown.
UR - http://www.scopus.com/inward/record.url?scp=40749135739&partnerID=8YFLogxK
U2 - 10.1049/iet-smt:20070055
DO - 10.1049/iet-smt:20070055
M3 - Article
AN - SCOPUS:40749135739
VL - 2
SP - 146
EP - 153
JO - IET Science, Measurement and Technology
JF - IET Science, Measurement and Technology
SN - 1751-8822
IS - 3
ER -