Effects of process parameters on force reduction and temperature variation during ultrasonic assisted incremental sheet forming process

Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

Autoren

  • Yangyang Long
  • Yanle Li
  • Jie Sun
  • Igor Ille
  • Jianfeng Li
  • Jens Twiefel

Externe Organisationen

  • Shandong University
Forschungs-netzwerk anzeigen

Details

OriginalspracheEnglisch
Seiten (von - bis)13-24
Seitenumfang12
FachzeitschriftInternational Journal of Advanced Manufacturing Technology
Jahrgang97
PublikationsstatusVeröffentlicht - 26 März 2018

Abstract

The incremental sheet forming (ISF) is an innovative dieless forming process featured with high formability and short lead time which is suitable for rapid prototyping and small volume production. The integration of ultrasonic (US) vibration into the ISF process can significantly reduce the forming force and bring other benefits. In this work, the impacts of process parameters including the sheet material, US power, feeding speed, and tool diameter, on force reduction and temperature increment were studied. The force reduction contains two components—the stress superposition-induced force reduction and acoustic softening-induced force reduction. The stress superposition-induced force reduction was analyzed by finite element simulation while the total force reduction was detected by experiments since currently, the unknown mechanism of the acoustic softening cannot be modeled. The temperature increment was measured by a high-speed infrared camera. The results show that the force reduction can go up to 56.58% and the temperature increment can be as high as 24.55 °C. In general, the material with a higher yield stress results in a higher force reduction and a higher temperature increment. A higher US power or a lower feeding speed can significantly enhance the force reduction and the interface temperature increment. The tool with a smaller diameter has a comparable effect as a larger tool, but a larger vibration amplitude is required.

ASJC Scopus Sachgebiete

Zitieren

Effects of process parameters on force reduction and temperature variation during ultrasonic assisted incremental sheet forming process. / Long, Yangyang; Li, Yanle; Sun, Jie et al.
in: International Journal of Advanced Manufacturing Technology, Jahrgang 97, 26.03.2018, S. 13-24.

Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

Download
@article{215bfa77ddf94b15bf2a789107b2c0d7,
title = "Effects of process parameters on force reduction and temperature variation during ultrasonic assisted incremental sheet forming process",
abstract = "The incremental sheet forming (ISF) is an innovative dieless forming process featured with high formability and short lead time which is suitable for rapid prototyping and small volume production. The integration of ultrasonic (US) vibration into the ISF process can significantly reduce the forming force and bring other benefits. In this work, the impacts of process parameters including the sheet material, US power, feeding speed, and tool diameter, on force reduction and temperature increment were studied. The force reduction contains two components—the stress superposition-induced force reduction and acoustic softening-induced force reduction. The stress superposition-induced force reduction was analyzed by finite element simulation while the total force reduction was detected by experiments since currently, the unknown mechanism of the acoustic softening cannot be modeled. The temperature increment was measured by a high-speed infrared camera. The results show that the force reduction can go up to 56.58% and the temperature increment can be as high as 24.55 °C. In general, the material with a higher yield stress results in a higher force reduction and a higher temperature increment. A higher US power or a lower feeding speed can significantly enhance the force reduction and the interface temperature increment. The tool with a smaller diameter has a comparable effect as a larger tool, but a larger vibration amplitude is required.",
keywords = "Force reduction, Incremental sheet forming, Interface temperature, Ultrasonic vibration",
author = "Yangyang Long and Yanle Li and Jie Sun and Igor Ille and Jianfeng Li and Jens Twiefel",
note = "Funding Information: Acknowledgements The authors would like to thank the preparatory visit funding from Sino-German Center for Research Promotion (GZ1381). Dr. Yanle Li is also funded by National Natural Science Foundation of China (51605258), China Postdoctoral Science Foundation funded project (2016M592180), and Postdoctoral innovation project of Shandong Province (201701011). Publisher Copyright: {\textcopyright} 2018, Springer-Verlag London Ltd., part of Springer Nature. Copyright: Copyright 2018 Elsevier B.V., All rights reserved.",
year = "2018",
month = mar,
day = "26",
doi = "10.1007/s00170-018-1886-0",
language = "English",
volume = "97",
pages = "13--24",
journal = "International Journal of Advanced Manufacturing Technology",
issn = "0268-3768",
publisher = "Springer London",

}

Download

TY - JOUR

T1 - Effects of process parameters on force reduction and temperature variation during ultrasonic assisted incremental sheet forming process

AU - Long, Yangyang

AU - Li, Yanle

AU - Sun, Jie

AU - Ille, Igor

AU - Li, Jianfeng

AU - Twiefel, Jens

N1 - Funding Information: Acknowledgements The authors would like to thank the preparatory visit funding from Sino-German Center for Research Promotion (GZ1381). Dr. Yanle Li is also funded by National Natural Science Foundation of China (51605258), China Postdoctoral Science Foundation funded project (2016M592180), and Postdoctoral innovation project of Shandong Province (201701011). Publisher Copyright: © 2018, Springer-Verlag London Ltd., part of Springer Nature. Copyright: Copyright 2018 Elsevier B.V., All rights reserved.

PY - 2018/3/26

Y1 - 2018/3/26

N2 - The incremental sheet forming (ISF) is an innovative dieless forming process featured with high formability and short lead time which is suitable for rapid prototyping and small volume production. The integration of ultrasonic (US) vibration into the ISF process can significantly reduce the forming force and bring other benefits. In this work, the impacts of process parameters including the sheet material, US power, feeding speed, and tool diameter, on force reduction and temperature increment were studied. The force reduction contains two components—the stress superposition-induced force reduction and acoustic softening-induced force reduction. The stress superposition-induced force reduction was analyzed by finite element simulation while the total force reduction was detected by experiments since currently, the unknown mechanism of the acoustic softening cannot be modeled. The temperature increment was measured by a high-speed infrared camera. The results show that the force reduction can go up to 56.58% and the temperature increment can be as high as 24.55 °C. In general, the material with a higher yield stress results in a higher force reduction and a higher temperature increment. A higher US power or a lower feeding speed can significantly enhance the force reduction and the interface temperature increment. The tool with a smaller diameter has a comparable effect as a larger tool, but a larger vibration amplitude is required.

AB - The incremental sheet forming (ISF) is an innovative dieless forming process featured with high formability and short lead time which is suitable for rapid prototyping and small volume production. The integration of ultrasonic (US) vibration into the ISF process can significantly reduce the forming force and bring other benefits. In this work, the impacts of process parameters including the sheet material, US power, feeding speed, and tool diameter, on force reduction and temperature increment were studied. The force reduction contains two components—the stress superposition-induced force reduction and acoustic softening-induced force reduction. The stress superposition-induced force reduction was analyzed by finite element simulation while the total force reduction was detected by experiments since currently, the unknown mechanism of the acoustic softening cannot be modeled. The temperature increment was measured by a high-speed infrared camera. The results show that the force reduction can go up to 56.58% and the temperature increment can be as high as 24.55 °C. In general, the material with a higher yield stress results in a higher force reduction and a higher temperature increment. A higher US power or a lower feeding speed can significantly enhance the force reduction and the interface temperature increment. The tool with a smaller diameter has a comparable effect as a larger tool, but a larger vibration amplitude is required.

KW - Force reduction

KW - Incremental sheet forming

KW - Interface temperature

KW - Ultrasonic vibration

UR - http://www.scopus.com/inward/record.url?scp=85044461747&partnerID=8YFLogxK

U2 - 10.1007/s00170-018-1886-0

DO - 10.1007/s00170-018-1886-0

M3 - Article

AN - SCOPUS:85044461747

VL - 97

SP - 13

EP - 24

JO - International Journal of Advanced Manufacturing Technology

JF - International Journal of Advanced Manufacturing Technology

SN - 0268-3768

ER -