Details
| Originalsprache | Englisch |
|---|---|
| Seiten (von - bis) | 719-724 |
| Seitenumfang | 6 |
| Fachzeitschrift | Physics of Metals and Metallography |
| Jahrgang | 117 |
| Ausgabenummer | 7 |
| Publikationsstatus | Veröffentlicht - 1 Juli 2016 |
Abstract
The effect of small tensile deformation (3, 6, and 10%) on the texture of preliminary annealed sheets of two-phase DP600 steel (0.10 C, 0.15 Si, 1.4 Mn, 0.007 P, 0.008 S, 0,009 N, 0.02–0,06 Al, 1 Cr–Mo–Ni (wt %)) is studied. Against the background of the annealing texture in the sheets, the {001} <110>, {111} <110>, {111} <112>, {111} <312> components of the slip texture and {115} <110>, {115} <552>, {221} <110>, {221} <114> orientations are developed, which can be associated with the twinning processes. The anisotropy pattern of the Young’s modulus (E) in the sheet plane remains the same after tensile deformation of the annealed sheets. After tension, the values of E decrease in all directions as a result of the onset and development of microdamages. The anisotropy of damage (D) in the plane of the steel sheets after tension is characterized by a maximum in the transverse direction (TD) and a minimum in the rolling direction (RD).
ASJC Scopus Sachgebiete
- Physik und Astronomie (insg.)
- Physik der kondensierten Materie
- Werkstoffwissenschaften (insg.)
- Werkstoffchemie
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
in: Physics of Metals and Metallography, Jahrgang 117, Nr. 7, 01.07.2016, S. 719-724.
Publikation: Beitrag in Fachzeitschrift › Artikel › Forschung › Peer-Review
}
TY - JOUR
T1 - Effect of deformation texture on the anisotropy of elasticity and damage of two-phase steel sheets
AU - Bryukhanov, A. A.
AU - Gerstein, G.
AU - Dyachok, D. A.
AU - Nürnberger, F.
PY - 2016/7/1
Y1 - 2016/7/1
N2 - The effect of small tensile deformation (3, 6, and 10%) on the texture of preliminary annealed sheets of two-phase DP600 steel (0.10 C, 0.15 Si, 1.4 Mn, 0.007 P, 0.008 S, 0,009 N, 0.02–0,06 Al, 1 Cr–Mo–Ni (wt %)) is studied. Against the background of the annealing texture in the sheets, the {001} <110>, {111} <110>, {111} <112>, {111} <312> components of the slip texture and {115} <110>, {115} <552>, {221} <110>, {221} <114> orientations are developed, which can be associated with the twinning processes. The anisotropy pattern of the Young’s modulus (E) in the sheet plane remains the same after tensile deformation of the annealed sheets. After tension, the values of E decrease in all directions as a result of the onset and development of microdamages. The anisotropy of damage (D) in the plane of the steel sheets after tension is characterized by a maximum in the transverse direction (TD) and a minimum in the rolling direction (RD).
AB - The effect of small tensile deformation (3, 6, and 10%) on the texture of preliminary annealed sheets of two-phase DP600 steel (0.10 C, 0.15 Si, 1.4 Mn, 0.007 P, 0.008 S, 0,009 N, 0.02–0,06 Al, 1 Cr–Mo–Ni (wt %)) is studied. Against the background of the annealing texture in the sheets, the {001} <110>, {111} <110>, {111} <112>, {111} <312> components of the slip texture and {115} <110>, {115} <552>, {221} <110>, {221} <114> orientations are developed, which can be associated with the twinning processes. The anisotropy pattern of the Young’s modulus (E) in the sheet plane remains the same after tensile deformation of the annealed sheets. After tension, the values of E decrease in all directions as a result of the onset and development of microdamages. The anisotropy of damage (D) in the plane of the steel sheets after tension is characterized by a maximum in the transverse direction (TD) and a minimum in the rolling direction (RD).
KW - annealing
KW - damage
KW - deformation
KW - orientation
KW - pole figure
KW - tension
KW - texture
KW - Young’s modulus
UR - http://www.scopus.com/inward/record.url?scp=84979221728&partnerID=8YFLogxK
U2 - 10.1134/s0031918x16050033
DO - 10.1134/s0031918x16050033
M3 - Article
AN - SCOPUS:84979221728
VL - 117
SP - 719
EP - 724
JO - Physics of Metals and Metallography
JF - Physics of Metals and Metallography
SN - 0031-918X
IS - 7
ER -