Details
| Originalsprache | Englisch |
|---|---|
| Titel des Sammelwerks | 75th Annual Technical Conference and Exhibition of the Society of Plastics Engineers, SPE ANTEC Anaheim 2017 |
| Seiten | 431-437 |
| Seitenumfang | 7 |
| ISBN (elektronisch) | 9780878493609 |
| Publikationsstatus | Veröffentlicht - 8 Mai 2017 |
| Extern publiziert | Ja |
| Veranstaltung | 75th Annual Technical Conference and Exhibition of the Society of Plastics Engineers, SPE ANTEC Anaheim 2017 - Anaheim, USA / Vereinigte Staaten Dauer: 8 Mai 2017 → 10 Mai 2017 |
Publikationsreihe
| Name | Annual Technical Conference - ANTEC, Conference Proceedings |
|---|---|
| Band | 2017-May |
Abstract
Injection molding grade PLLA/PDLA compounds have been developed by melt blending. The article reports in particular about influence of acrylic core-shell impact modifier on crystallization behavior, thermo-mechanical properties of the compounds and injection molding cycle time. DSC results have shown formation of stereocomplex crystalline structure in compounds. Addition of impact modifier displays no influence on melting point or enthalpy of crystalline structure. Plasticization of compounds resulted in decrease of tensile properties, however impact strength has increased. Additionally a peak of maximum loading with additive was observed. Plasticizing effect due to addition of core-shell entities was confirmed by sharp increase of elongation at break. Only marginal effect on heat distortion temperature of the compounds was found. Increasing content of the toughening agent caused lowering of materials' flowability. Influence of impact modifier on resulting injection molding cycle time was insignificant.
ASJC Scopus Sachgebiete
- Chemische Verfahrenstechnik (insg.)
- Allgemeine chemische Verfahrenstechnik
- Werkstoffwissenschaften (insg.)
- Polymere und Kunststoffe
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
75th Annual Technical Conference and Exhibition of the Society of Plastics Engineers, SPE ANTEC Anaheim 2017. 2017. S. 431-437 (Annual Technical Conference - ANTEC, Conference Proceedings; Band 2017-May).
Publikation: Beitrag in Buch/Bericht/Sammelwerk/Konferenzband › Aufsatz in Konferenzband › Forschung › Peer-Review
}
TY - GEN
T1 - Effect of acrylic core-shell impact modifier on processing and thermo-mechanical properties of stereocomplex poly(lactic acid)
AU - Leciński, Jacek
AU - Siebert-Raths, Andrea
AU - Jahn, Daniela
PY - 2017/5/8
Y1 - 2017/5/8
N2 - Injection molding grade PLLA/PDLA compounds have been developed by melt blending. The article reports in particular about influence of acrylic core-shell impact modifier on crystallization behavior, thermo-mechanical properties of the compounds and injection molding cycle time. DSC results have shown formation of stereocomplex crystalline structure in compounds. Addition of impact modifier displays no influence on melting point or enthalpy of crystalline structure. Plasticization of compounds resulted in decrease of tensile properties, however impact strength has increased. Additionally a peak of maximum loading with additive was observed. Plasticizing effect due to addition of core-shell entities was confirmed by sharp increase of elongation at break. Only marginal effect on heat distortion temperature of the compounds was found. Increasing content of the toughening agent caused lowering of materials' flowability. Influence of impact modifier on resulting injection molding cycle time was insignificant.
AB - Injection molding grade PLLA/PDLA compounds have been developed by melt blending. The article reports in particular about influence of acrylic core-shell impact modifier on crystallization behavior, thermo-mechanical properties of the compounds and injection molding cycle time. DSC results have shown formation of stereocomplex crystalline structure in compounds. Addition of impact modifier displays no influence on melting point or enthalpy of crystalline structure. Plasticization of compounds resulted in decrease of tensile properties, however impact strength has increased. Additionally a peak of maximum loading with additive was observed. Plasticizing effect due to addition of core-shell entities was confirmed by sharp increase of elongation at break. Only marginal effect on heat distortion temperature of the compounds was found. Increasing content of the toughening agent caused lowering of materials' flowability. Influence of impact modifier on resulting injection molding cycle time was insignificant.
UR - http://www.scopus.com/inward/record.url?scp=85038639177&partnerID=8YFLogxK
M3 - Conference contribution
AN - SCOPUS:85038639177
SN - 978-0-692-88309-9
T3 - Annual Technical Conference - ANTEC, Conference Proceedings
SP - 431
EP - 437
BT - 75th Annual Technical Conference and Exhibition of the Society of Plastics Engineers, SPE ANTEC Anaheim 2017
T2 - 75th Annual Technical Conference and Exhibition of the Society of Plastics Engineers, SPE ANTEC Anaheim 2017
Y2 - 8 May 2017 through 10 May 2017
ER -