Details
| Originalsprache | Englisch |
|---|---|
| Titel des Sammelwerks | Lecture Notes in Production Engineering |
| Herausgeber (Verlag) | Springer Nature |
| Seiten | 737-746 |
| Seitenumfang | 10 |
| ISBN (elektronisch) | 978-3-031-18318-8 |
| ISBN (Print) | 978-3-031-18317-1 |
| Publikationsstatus | Veröffentlicht - 2 Feb. 2023 |
Publikationsreihe
| Name | Lecture Notes in Production Engineering |
|---|---|
| Band | Part F1163 |
| ISSN (Print) | 2194-0525 |
| ISSN (elektronisch) | 2194-0533 |
Abstract
Various production parameters such as inhomogeneous material properties or varying lubrication lead to deviations in manufacturing. Quality management must ensure that the required geometric dimensions and tolerances are maintained. In many cases, the inspection is carried out randomly, manually and at the end of the production chain, which prevents early detection of rejects and intervention. The problem complexifies due to the increasing demand for 100% testing of workpieces, e.g. for safety-relevant components in the automotive industry. This leads to additional effort regarding time, personnel and logistics. One solution to these problems is the inline measurement of the workpiece geometry. Due to rough environmental conditions in forming machines, the implementation presents particular challenges. In this publication, the disturbance variables occurring in presses are described and requirements are derived which result for the applied sensor technology. Based on this, a methodology for measuring small rotationally symmetrical workpieces is presented.
ASJC Scopus Sachgebiete
- Ingenieurwesen (insg.)
- Wirtschaftsingenieurwesen und Fertigungstechnik
- Volkswirtschaftslehre, Ökonometrie und Finanzen (insg.)
- Volkswirtschaftslehre, Ökonometrie und Finanzen (sonstige)
- Ingenieurwesen (insg.)
- Sicherheit, Risiko, Zuverlässigkeit und Qualität
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
Lecture Notes in Production Engineering. Springer Nature, 2023. S. 737-746 (Lecture Notes in Production Engineering; Band Part F1163).
Publikation: Beitrag in Buch/Bericht/Sammelwerk/Konferenzband › Beitrag in Buch/Sammelwerk › Forschung › Peer-Review
}
TY - CHAP
T1 - Early Detection of Rejects in Presses
AU - Koß, J.
AU - Höber, A.
AU - Krimm, R.
AU - Behrens, B. A.
N1 - Funding Information: Acknowledgement. The IGF project “In-process reject detection by means of comprehensive measurement of the workpiece geometry in multi-stage presses” (funding number 21554 N) of the research association EFB e.V. was funded by the German Federal Ministry of Economics and Climate Protection via the German Federation of Industrial Research Associations (AiF) within the framework of the program for the promotion of joint industrial research (IGF) on the basis of a resolution of the German Bundestag.
PY - 2023/2/2
Y1 - 2023/2/2
N2 - Various production parameters such as inhomogeneous material properties or varying lubrication lead to deviations in manufacturing. Quality management must ensure that the required geometric dimensions and tolerances are maintained. In many cases, the inspection is carried out randomly, manually and at the end of the production chain, which prevents early detection of rejects and intervention. The problem complexifies due to the increasing demand for 100% testing of workpieces, e.g. for safety-relevant components in the automotive industry. This leads to additional effort regarding time, personnel and logistics. One solution to these problems is the inline measurement of the workpiece geometry. Due to rough environmental conditions in forming machines, the implementation presents particular challenges. In this publication, the disturbance variables occurring in presses are described and requirements are derived which result for the applied sensor technology. Based on this, a methodology for measuring small rotationally symmetrical workpieces is presented.
AB - Various production parameters such as inhomogeneous material properties or varying lubrication lead to deviations in manufacturing. Quality management must ensure that the required geometric dimensions and tolerances are maintained. In many cases, the inspection is carried out randomly, manually and at the end of the production chain, which prevents early detection of rejects and intervention. The problem complexifies due to the increasing demand for 100% testing of workpieces, e.g. for safety-relevant components in the automotive industry. This leads to additional effort regarding time, personnel and logistics. One solution to these problems is the inline measurement of the workpiece geometry. Due to rough environmental conditions in forming machines, the implementation presents particular challenges. In this publication, the disturbance variables occurring in presses are described and requirements are derived which result for the applied sensor technology. Based on this, a methodology for measuring small rotationally symmetrical workpieces is presented.
KW - Inline measurement
KW - Quality management
KW - Reject detection
UR - http://www.scopus.com/inward/record.url?scp=85166646807&partnerID=8YFLogxK
U2 - 10.1007/978-3-031-18318-8_73
DO - 10.1007/978-3-031-18318-8_73
M3 - Contribution to book/anthology
AN - SCOPUS:85166646807
SN - 978-3-031-18317-1
T3 - Lecture Notes in Production Engineering
SP - 737
EP - 746
BT - Lecture Notes in Production Engineering
PB - Springer Nature
ER -