Design and control of a micro linear motor with integrated magnetic guidance

Publikation: Beitrag in Buch/Bericht/Sammelwerk/Konferenzband › Aufsatz in Konferenzband › Forschung › Peer-Review

Autoren

  • Sven Demmig
  • Ralf Gehrking
  • Karsten Wiedmann
  • Axel Mertens
  • Bernd Ponick

Organisationseinheiten

Forschungs-netzwerk anzeigen

Details

OriginalspracheEnglisch
Titel des SammelwerksConference Record of the 2007 IEEE Industry Applications Conference 42nd Annual Meeting, IAS
Herausgeber (Verlag)Institute of Electrical and Electronics Engineers Inc.
Seiten518-522
Seitenumfang5
ISBN (Print)1424403642, 9781424403646
PublikationsstatusVeröffentlicht - 2007
Veranstaltung2007 IEEE Industry Applications Conference 42nd Annual Meeting, IAS - New Orleans, LA, USA / Vereinigte Staaten
Dauer: 23 Sept. 2007 → 27 Sept. 2007

Publikationsreihe

NameConference Record - IAS Annual Meeting (IEEE Industry Applications Society)
ISSN (Print)0197-2618

Abstract

This paper reports on a micro linear stepping motor with an integrated magnetic guidance which is built up using micro fabrication techniques like sputtering, UV depth lithography and electroplating. The results of FEM simulations in order to design the motor and the necessary changes in the layout for the purpose of levitating the traveller without additional components are presented. Using the same windings for the thrust and the levitation force a special control strategy is described and afterwards verified by simulations. At the end measurement results to underlay the FEM model are shown.

ASJC Scopus Sachgebiete

Zitieren

Design and control of a micro linear motor with integrated magnetic guidance. / Demmig, Sven; Gehrking, Ralf; Wiedmann, Karsten et al.
Conference Record of the 2007 IEEE Industry Applications Conference 42nd Annual Meeting, IAS. Institute of Electrical and Electronics Engineers Inc., 2007. S. 518-522 4347833 (Conference Record - IAS Annual Meeting (IEEE Industry Applications Society)).

Publikation: Beitrag in Buch/Bericht/Sammelwerk/Konferenzband › Aufsatz in Konferenzband › Forschung › Peer-Review

Demmig, S, Gehrking, R, Wiedmann, K, Mertens, A & Ponick, B 2007, Design and control of a micro linear motor with integrated magnetic guidance. in Conference Record of the 2007 IEEE Industry Applications Conference 42nd Annual Meeting, IAS., 4347833, Conference Record - IAS Annual Meeting (IEEE Industry Applications Society), Institute of Electrical and Electronics Engineers Inc., S. 518-522, 2007 IEEE Industry Applications Conference 42nd Annual Meeting, IAS, New Orleans, LA, USA / Vereinigte Staaten, 23 Sept. 2007. https://doi.org/10.1109/07ias.2007.84
Demmig, S., Gehrking, R., Wiedmann, K., Mertens, A., & Ponick, B. (2007). Design and control of a micro linear motor with integrated magnetic guidance. In Conference Record of the 2007 IEEE Industry Applications Conference 42nd Annual Meeting, IAS (S. 518-522). Artikel 4347833 (Conference Record - IAS Annual Meeting (IEEE Industry Applications Society)). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/07ias.2007.84
Demmig S, Gehrking R, Wiedmann K, Mertens A, Ponick B. Design and control of a micro linear motor with integrated magnetic guidance. in Conference Record of the 2007 IEEE Industry Applications Conference 42nd Annual Meeting, IAS. Institute of Electrical and Electronics Engineers Inc. 2007. S. 518-522. 4347833. (Conference Record - IAS Annual Meeting (IEEE Industry Applications Society)). doi: 10.1109/07ias.2007.84
Demmig, Sven ; Gehrking, Ralf ; Wiedmann, Karsten et al. / Design and control of a micro linear motor with integrated magnetic guidance. Conference Record of the 2007 IEEE Industry Applications Conference 42nd Annual Meeting, IAS. Institute of Electrical and Electronics Engineers Inc., 2007. S. 518-522 (Conference Record - IAS Annual Meeting (IEEE Industry Applications Society)).
Download
@inproceedings{6ff8984bf3ae470c9ce2ca8f6c584e82,
title = "Design and control of a micro linear motor with integrated magnetic guidance",
abstract = "This paper reports on a micro linear stepping motor with an integrated magnetic guidance which is built up using micro fabrication techniques like sputtering, UV depth lithography and electroplating. The results of FEM simulations in order to design the motor and the necessary changes in the layout for the purpose of levitating the traveller without additional components are presented. Using the same windings for the thrust and the levitation force a special control strategy is described and afterwards verified by simulations. At the end measurement results to underlay the FEM model are shown.",
keywords = "Linear motors, Magnetic levitation, Microactuators, Micromotors, Variable structure systems",
author = "Sven Demmig and Ralf Gehrking and Karsten Wiedmann and Axel Mertens and Bernd Ponick",
note = "Copyright: Copyright 2020 Elsevier B.V., All rights reserved.; 2007 IEEE Industry Applications Conference 42nd Annual Meeting, IAS ; Conference date: 23-09-2007 Through 27-09-2007",
year = "2007",
doi = "10.1109/07ias.2007.84",
language = "English",
isbn = "1424403642",
series = "Conference Record - IAS Annual Meeting (IEEE Industry Applications Society)",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
pages = "518--522",
booktitle = "Conference Record of the 2007 IEEE Industry Applications Conference 42nd Annual Meeting, IAS",
address = "United States",

}

Download

TY - GEN

T1 - Design and control of a micro linear motor with integrated magnetic guidance

AU - Demmig, Sven

AU - Gehrking, Ralf

AU - Wiedmann, Karsten

AU - Mertens, Axel

AU - Ponick, Bernd

N1 - Copyright: Copyright 2020 Elsevier B.V., All rights reserved.

PY - 2007

Y1 - 2007

N2 - This paper reports on a micro linear stepping motor with an integrated magnetic guidance which is built up using micro fabrication techniques like sputtering, UV depth lithography and electroplating. The results of FEM simulations in order to design the motor and the necessary changes in the layout for the purpose of levitating the traveller without additional components are presented. Using the same windings for the thrust and the levitation force a special control strategy is described and afterwards verified by simulations. At the end measurement results to underlay the FEM model are shown.

AB - This paper reports on a micro linear stepping motor with an integrated magnetic guidance which is built up using micro fabrication techniques like sputtering, UV depth lithography and electroplating. The results of FEM simulations in order to design the motor and the necessary changes in the layout for the purpose of levitating the traveller without additional components are presented. Using the same windings for the thrust and the levitation force a special control strategy is described and afterwards verified by simulations. At the end measurement results to underlay the FEM model are shown.

KW - Linear motors

KW - Magnetic levitation

KW - Microactuators

KW - Micromotors

KW - Variable structure systems

UR - http://www.scopus.com/inward/record.url?scp=48949084389&partnerID=8YFLogxK

U2 - 10.1109/07ias.2007.84

DO - 10.1109/07ias.2007.84

M3 - Conference contribution

AN - SCOPUS:48949084389

SN - 1424403642

SN - 9781424403646

T3 - Conference Record - IAS Annual Meeting (IEEE Industry Applications Society)

SP - 518

EP - 522

BT - Conference Record of the 2007 IEEE Industry Applications Conference 42nd Annual Meeting, IAS

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 2007 IEEE Industry Applications Conference 42nd Annual Meeting, IAS

Y2 - 23 September 2007 through 27 September 2007

ER -