TY - BOOK

T1 - Design and construction of a transportable quantum gravimeter and realization of an atom-chip magnetic trap

AU - Sahelgozin, Maral

PY - 2019

Y1 - 2019

N2 - The quantum gravimeter QG-1 is designed to perform local gravity measurements in field with residual uncertainties surpassing state-of-the-art absolute gravimeters. It will use delta-kick collimated Bose-Einstein condensates (BEC) of 87 Rb atoms as the source for matter-wave interferometry and aims for an uncertainty level below 3 nm/s 2 with a repetition rate of 0.5 Hz. In the frame of this thesis, the atom-chip source has been set up and characterized. In order to meet the requirements for transportability, the apparatus needs to be compact and robust. Additionally, a high BEC flux is desired for the targeted statistical uncertainty. To meet these requirements a double magneto-optical trap (MOT) configuration based on a 3-layer atom chip has been implemented. Furthermore, a compact high power fiber-based laser system has been developed to provide the light for atomic manipulation. To power and control this laser system and generate the magnetic fields necessary to trap atoms, a miniaturized electronic system with low power consumption has been utilized and characterized. The steps towards trapping the atoms inside a magnetic trap on which the evaporation will be implemented have been realized and optimized. A two-dimensional MOT has been employed and an optimized atomic beam flux of 2.2 × 10 9 atoms/s with a mean longitudinal velocity of 17.2 m/s and a narrow longitudinal velocity distribution of 2.2 m/s has been used to load a 3D-chip MOT. The resulting 3D-MOT has been characterized and a loading rate of 8.1×10 8 atoms/s has been attained. After loading for 300 ms, 2.4×10 8 atoms are trapped in the 3D-MOT. Applying a subsequent compressed MOT stage, the cloud density has been increased by a factor of 10. This denser atomic ensemble with 2.9 × 10 10 atoms/cm 3 has been further cooled in a polarization gradient cooling (PGC) stage to 5.6 μK in order to increase the mode match with the subsequent magnetic trap. In the initial large volume magnetic trap generated by the wire structures on the mesoscopic and the base layers of the atom-chip assembly, 3.6 × 10 7 atoms have been captured. This trap features a temperature of 44.3 μK, a trapping frequency of 9.1 Hz in its weak confining axis and a phase-space density of 4.5 × 10 −7 . The process of transferring the atoms into the final magnetic trap with higher trapping frequency for an efficient BEC evaporation, which is formed by the wire structures on the base and science chip has been tested. With this, all the necessary functionalities of a high-flux BEC source setup have been demonstrated.

AB - The quantum gravimeter QG-1 is designed to perform local gravity measurements in field with residual uncertainties surpassing state-of-the-art absolute gravimeters. It will use delta-kick collimated Bose-Einstein condensates (BEC) of 87 Rb atoms as the source for matter-wave interferometry and aims for an uncertainty level below 3 nm/s 2 with a repetition rate of 0.5 Hz. In the frame of this thesis, the atom-chip source has been set up and characterized. In order to meet the requirements for transportability, the apparatus needs to be compact and robust. Additionally, a high BEC flux is desired for the targeted statistical uncertainty. To meet these requirements a double magneto-optical trap (MOT) configuration based on a 3-layer atom chip has been implemented. Furthermore, a compact high power fiber-based laser system has been developed to provide the light for atomic manipulation. To power and control this laser system and generate the magnetic fields necessary to trap atoms, a miniaturized electronic system with low power consumption has been utilized and characterized. The steps towards trapping the atoms inside a magnetic trap on which the evaporation will be implemented have been realized and optimized. A two-dimensional MOT has been employed and an optimized atomic beam flux of 2.2 × 10 9 atoms/s with a mean longitudinal velocity of 17.2 m/s and a narrow longitudinal velocity distribution of 2.2 m/s has been used to load a 3D-chip MOT. The resulting 3D-MOT has been characterized and a loading rate of 8.1×10 8 atoms/s has been attained. After loading for 300 ms, 2.4×10 8 atoms are trapped in the 3D-MOT. Applying a subsequent compressed MOT stage, the cloud density has been increased by a factor of 10. This denser atomic ensemble with 2.9 × 10 10 atoms/cm 3 has been further cooled in a polarization gradient cooling (PGC) stage to 5.6 μK in order to increase the mode match with the subsequent magnetic trap. In the initial large volume magnetic trap generated by the wire structures on the mesoscopic and the base layers of the atom-chip assembly, 3.6 × 10 7 atoms have been captured. This trap features a temperature of 44.3 μK, a trapping frequency of 9.1 Hz in its weak confining axis and a phase-space density of 4.5 × 10 −7 . The process of transferring the atoms into the final magnetic trap with higher trapping frequency for an efficient BEC evaporation, which is formed by the wire structures on the base and science chip has been tested. With this, all the necessary functionalities of a high-flux BEC source setup have been demonstrated.

U2 - 10.15488/5055

DO - 10.15488/5055

M3 - Doctoral thesis

CY - Hannover

ER -