Degradation behavior in upstream/downstream via test structures

Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

Autoren

Externe Organisationen

  • X-FAB Silicon Foundries SE
Forschungs-netzwerk anzeigen

Details

OriginalspracheEnglisch
Seiten (von - bis)1724-1728
Seitenumfang5
FachzeitschriftMicroelectronics reliability
Jahrgang54
Ausgabenummer9-10
PublikationsstatusVeröffentlicht - 1 Sept. 2014

Abstract

The miniaturization process of CMOS components creates new challenges for the development of integrated circuits. Especially the connections with a tungsten via between two metal layers can be a problem. Changes in geometry can bear on reliability problems. For a robust metallization design it is necessary to know, how strong the influence of the tungsten via alignment affects the physical behavior. The lifetime of up- and downstream test structures with different overlaps as well as strong misalignment was determined by measurements. Investigations have shown that the alignments have a noticeable effect on the reliability and performance of test structures. The downstream line shows the expected lifetime behavior. For the upstream line no influence of the misalignment on the lifetime was found. Simulations are taken into account to understand the thermal-electrical and mechanical behavior.

ASJC Scopus Sachgebiete

Zitieren

Degradation behavior in upstream/downstream via test structures. / Kludt, J.; Weide-Zaage, K.; Ackermann, M. et al.
in: Microelectronics reliability, Jahrgang 54, Nr. 9-10, 01.09.2014, S. 1724-1728.

Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

Kludt J, Weide-Zaage K, Ackermann M, Hein V, Kovács C. Degradation behavior in upstream/downstream via test structures. Microelectronics reliability. 2014 Sep 1;54(9-10):1724-1728. doi: 10.1016/j.microrel.2014.07.042
Kludt, J. ; Weide-Zaage, K. ; Ackermann, M. et al. / Degradation behavior in upstream/downstream via test structures. in: Microelectronics reliability. 2014 ; Jahrgang 54, Nr. 9-10. S. 1724-1728.
Download
@article{83474a1c9c3d41c69494e485a3830566,
title = "Degradation behavior in upstream/downstream via test structures",
abstract = "The miniaturization process of CMOS components creates new challenges for the development of integrated circuits. Especially the connections with a tungsten via between two metal layers can be a problem. Changes in geometry can bear on reliability problems. For a robust metallization design it is necessary to know, how strong the influence of the tungsten via alignment affects the physical behavior. The lifetime of up- and downstream test structures with different overlaps as well as strong misalignment was determined by measurements. Investigations have shown that the alignments have a noticeable effect on the reliability and performance of test structures. The downstream line shows the expected lifetime behavior. For the upstream line no influence of the misalignment on the lifetime was found. Simulations are taken into account to understand the thermal-electrical and mechanical behavior.",
keywords = "Electromigration, Metallization, Reliability, Simulation",
author = "J. Kludt and K. Weide-Zaage and M. Ackermann and V. Hein and C. Kov{\'a}cs",
note = "Publisher Copyright: {\textcopyright} 2014 Elsevier Ltd. All rights reserved. Copyright: Copyright 2014 Elsevier B.V., All rights reserved.",
year = "2014",
month = sep,
day = "1",
doi = "10.1016/j.microrel.2014.07.042",
language = "English",
volume = "54",
pages = "1724--1728",
journal = "Microelectronics reliability",
issn = "0026-2714",
publisher = "Elsevier Ltd.",
number = "9-10",

}

Download

TY - JOUR

T1 - Degradation behavior in upstream/downstream via test structures

AU - Kludt, J.

AU - Weide-Zaage, K.

AU - Ackermann, M.

AU - Hein, V.

AU - Kovács, C.

N1 - Publisher Copyright: © 2014 Elsevier Ltd. All rights reserved. Copyright: Copyright 2014 Elsevier B.V., All rights reserved.

PY - 2014/9/1

Y1 - 2014/9/1

N2 - The miniaturization process of CMOS components creates new challenges for the development of integrated circuits. Especially the connections with a tungsten via between two metal layers can be a problem. Changes in geometry can bear on reliability problems. For a robust metallization design it is necessary to know, how strong the influence of the tungsten via alignment affects the physical behavior. The lifetime of up- and downstream test structures with different overlaps as well as strong misalignment was determined by measurements. Investigations have shown that the alignments have a noticeable effect on the reliability and performance of test structures. The downstream line shows the expected lifetime behavior. For the upstream line no influence of the misalignment on the lifetime was found. Simulations are taken into account to understand the thermal-electrical and mechanical behavior.

AB - The miniaturization process of CMOS components creates new challenges for the development of integrated circuits. Especially the connections with a tungsten via between two metal layers can be a problem. Changes in geometry can bear on reliability problems. For a robust metallization design it is necessary to know, how strong the influence of the tungsten via alignment affects the physical behavior. The lifetime of up- and downstream test structures with different overlaps as well as strong misalignment was determined by measurements. Investigations have shown that the alignments have a noticeable effect on the reliability and performance of test structures. The downstream line shows the expected lifetime behavior. For the upstream line no influence of the misalignment on the lifetime was found. Simulations are taken into account to understand the thermal-electrical and mechanical behavior.

KW - Electromigration

KW - Metallization

KW - Reliability

KW - Simulation

UR - http://www.scopus.com/inward/record.url?scp=84908501099&partnerID=8YFLogxK

U2 - 10.1016/j.microrel.2014.07.042

DO - 10.1016/j.microrel.2014.07.042

M3 - Article

AN - SCOPUS:84908501099

VL - 54

SP - 1724

EP - 1728

JO - Microelectronics reliability

JF - Microelectronics reliability

SN - 0026-2714

IS - 9-10

ER -

Von denselben Autoren