Details
| Originalsprache | Englisch |
|---|---|
| Titel des Sammelwerks | High-Power Laser Materials Processing |
| Untertitel | Lasers, Beam Delivery, Diagnostics, and Applications III |
| Herausgeber (Verlag) | SPIE |
| ISBN (Print) | 9780819498762 |
| Publikationsstatus | Veröffentlicht - 20 Feb. 2014 |
| Extern publiziert | Ja |
| Veranstaltung | High-Power Laser Materials Processing: Lasers, Beam Delivery, Diagnostics, and Applications III - San Francisco, CA, USA / Vereinigte Staaten Dauer: 4 Feb. 2014 → 6 Feb. 2014 |
Publikationsreihe
| Name | Proceedings of SPIE - The International Society for Optical Engineering |
|---|---|
| Band | 8963 |
| ISSN (Print) | 0277-786X |
| ISSN (elektronisch) | 1996-756X |
Abstract
Continuous carbon fibre reinforced plastics (CFRP) are recognized as having a significant lightweight construction potential for a wide variety of industrial applications. However, a todays barrier for a comprehensive dissemination of CFRP structures is the lack of economic, quick and reliable manufacture processes, e.g. the cutting and drilling steps. In this paper, the capability of using pulsed disk lasers in CFRP machining is discussed. In CFRP processing with NIR lasers, carbon fibers show excellent optical absorption and heat dissipation, contrary to the plastics matrix. Therefore heat dissipation away from the laser focus into the material is driven by heat conduction of the fibres. The matrix is heated indirectly by heat transfer from the fibres. To cut CFRP, it is required to reach the melting temperature for thermoplastic matrix materials or the disintegration temperature for thermoset systems as well as the sublimation temperature of the reinforcing fibers simultaneously. One solution for this problem is to use short pulse nanosecond lasers. We have investigated CFRP cutting and drilling with such a laser (max. 7 mJ @ 10 kHz, 30 ns). This laser offers the opportunity of wide range parameter tuning for systematic process optimization. By applying drilling and cutting operations based on galvanometer scanning techniques in multi-cycle mode, excellent surface and edge characteristics in terms of delamination-free and intact fiber-matrix interface were achieved. The results indicate that nanosecond disk laser machining could consequently be a suitable tool for the automotive and aircraft industry for cutting and drilling steps.
ASJC Scopus Sachgebiete
- Werkstoffwissenschaften (insg.)
- Elektronische, optische und magnetische Materialien
- Physik und Astronomie (insg.)
- Physik der kondensierten Materie
- Informatik (insg.)
- Angewandte Informatik
- Mathematik (insg.)
- Angewandte Mathematik
- Ingenieurwesen (insg.)
- Elektrotechnik und Elektronik
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
High-Power Laser Materials Processing: Lasers, Beam Delivery, Diagnostics, and Applications III. SPIE, 2014. 89630S (Proceedings of SPIE - The International Society for Optical Engineering; Band 8963).
Publikation: Beitrag in Buch/Bericht/Sammelwerk/Konferenzband › Aufsatz in Konferenzband › Forschung › Peer-Review
}
TY - GEN
T1 - Cutting and drilling of carbon fiber reinforced plastics (CFRP) by 70W short pulse nanosecond laser
AU - Jaeschke, Peter
AU - Stolberg, Klaus
AU - Bastick, Stefan
AU - Ziolkowski, Ewa
AU - Roehner, Markus
AU - Suttmann, Oliver
AU - Overmeyer, Ludger
PY - 2014/2/20
Y1 - 2014/2/20
N2 - Continuous carbon fibre reinforced plastics (CFRP) are recognized as having a significant lightweight construction potential for a wide variety of industrial applications. However, a todays barrier for a comprehensive dissemination of CFRP structures is the lack of economic, quick and reliable manufacture processes, e.g. the cutting and drilling steps. In this paper, the capability of using pulsed disk lasers in CFRP machining is discussed. In CFRP processing with NIR lasers, carbon fibers show excellent optical absorption and heat dissipation, contrary to the plastics matrix. Therefore heat dissipation away from the laser focus into the material is driven by heat conduction of the fibres. The matrix is heated indirectly by heat transfer from the fibres. To cut CFRP, it is required to reach the melting temperature for thermoplastic matrix materials or the disintegration temperature for thermoset systems as well as the sublimation temperature of the reinforcing fibers simultaneously. One solution for this problem is to use short pulse nanosecond lasers. We have investigated CFRP cutting and drilling with such a laser (max. 7 mJ @ 10 kHz, 30 ns). This laser offers the opportunity of wide range parameter tuning for systematic process optimization. By applying drilling and cutting operations based on galvanometer scanning techniques in multi-cycle mode, excellent surface and edge characteristics in terms of delamination-free and intact fiber-matrix interface were achieved. The results indicate that nanosecond disk laser machining could consequently be a suitable tool for the automotive and aircraft industry for cutting and drilling steps.
AB - Continuous carbon fibre reinforced plastics (CFRP) are recognized as having a significant lightweight construction potential for a wide variety of industrial applications. However, a todays barrier for a comprehensive dissemination of CFRP structures is the lack of economic, quick and reliable manufacture processes, e.g. the cutting and drilling steps. In this paper, the capability of using pulsed disk lasers in CFRP machining is discussed. In CFRP processing with NIR lasers, carbon fibers show excellent optical absorption and heat dissipation, contrary to the plastics matrix. Therefore heat dissipation away from the laser focus into the material is driven by heat conduction of the fibres. The matrix is heated indirectly by heat transfer from the fibres. To cut CFRP, it is required to reach the melting temperature for thermoplastic matrix materials or the disintegration temperature for thermoset systems as well as the sublimation temperature of the reinforcing fibers simultaneously. One solution for this problem is to use short pulse nanosecond lasers. We have investigated CFRP cutting and drilling with such a laser (max. 7 mJ @ 10 kHz, 30 ns). This laser offers the opportunity of wide range parameter tuning for systematic process optimization. By applying drilling and cutting operations based on galvanometer scanning techniques in multi-cycle mode, excellent surface and edge characteristics in terms of delamination-free and intact fiber-matrix interface were achieved. The results indicate that nanosecond disk laser machining could consequently be a suitable tool for the automotive and aircraft industry for cutting and drilling steps.
KW - ablation
KW - CFRP
KW - cutting
KW - disk laser
KW - drilling
KW - nanosecond pulses
KW - reinforced composites
UR - http://www.scopus.com/inward/record.url?scp=84902095911&partnerID=8YFLogxK
U2 - 10.1117/12.2036086
DO - 10.1117/12.2036086
M3 - Conference contribution
AN - SCOPUS:84902095911
SN - 9780819498762
T3 - Proceedings of SPIE - The International Society for Optical Engineering
BT - High-Power Laser Materials Processing
PB - SPIE
T2 - High-Power Laser Materials Processing: Lasers, Beam Delivery, Diagnostics, and Applications III
Y2 - 4 February 2014 through 6 February 2014
ER -