Details
| Originalsprache | Englisch |
|---|---|
| Titel des Sammelwerks | Proceedings of 2022 12th International Conference on Power, Energy and Electrical Engineering, CPEEE 2022 |
| Herausgeber (Verlag) | Institute of Electrical and Electronics Engineers Inc. |
| Seiten | 49-53 |
| Seitenumfang | 5 |
| ISBN (elektronisch) | 9781665420495 |
| Publikationsstatus | Veröffentlicht - 2022 |
| Veranstaltung | 12th International Conference on Power, Energy and Electrical Engineering, CPEEE 2022 - Shiga, Japan Dauer: 25 Feb. 2022 → 27 Feb. 2022 |
Abstract
Defining the armature winding in a fully superconducting generator means to make a fundamental design decision. Especially when using High Temperature Superconductors (HTS), this decision becomes more challenging, because the design has to comply with the general machine design constraints and the behaivor of the superconductor, which can contradict each other.This paper aims to introduce four different fully superconducting machine designs with different armature windings. Therefore, an integer slot distributed winding, a one and a two layer concentrated winding and an airgap winding, are investigated. For each winding a generator design is presented. By using FEM, the field distribution is calculated, which enables to estimate of the AC losses in order to make the overall performance of the four different machine designs becomes comparable.
ASJC Scopus Sachgebiete
- Entscheidungswissenschaften (insg.)
- Informationssysteme und -management
- Energie (insg.)
- Energieanlagenbau und Kraftwerkstechnik
- Energie (insg.)
- Feuerungstechnik
- Ingenieurwesen (insg.)
- Elektrotechnik und Elektronik
- Ingenieurwesen (insg.)
- Sicherheit, Risiko, Zuverlässigkeit und Qualität
- Werkstoffwissenschaften (insg.)
- Elektronische, optische und magnetische Materialien
- Mathematik (insg.)
- Steuerung und Optimierung
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
Proceedings of 2022 12th International Conference on Power, Energy and Electrical Engineering, CPEEE 2022. Institute of Electrical and Electronics Engineers Inc., 2022. S. 49-53.
Publikation: Beitrag in Buch/Bericht/Sammelwerk/Konferenzband › Aufsatz in Konferenzband › Forschung › Peer-Review
}
TY - GEN
T1 - Comparing Armature Windings for a 10 MW Fully Superconducting Synchronous Wind Turbine Generator
AU - Lengsfeld, Sebastian
AU - Grundmann, Joern
AU - Oomen, Marijn
AU - Vargas-Llanos, Carlos
AU - Ponick, Bernd
AU - Jung, Marco
N1 - Funding Information: The underlying work of this article was funded by the German Federal Ministry for Economic Affairs and Energy (project name “SupraGenSys”, funding reference number 03EE3010A, 03EE3010B and 03EE3010D). The responsibility for the content of this article lies with the authors and does not necessarily reflect the opinion of the SupraGenSys project consortium.
PY - 2022
Y1 - 2022
N2 - Defining the armature winding in a fully superconducting generator means to make a fundamental design decision. Especially when using High Temperature Superconductors (HTS), this decision becomes more challenging, because the design has to comply with the general machine design constraints and the behaivor of the superconductor, which can contradict each other.This paper aims to introduce four different fully superconducting machine designs with different armature windings. Therefore, an integer slot distributed winding, a one and a two layer concentrated winding and an airgap winding, are investigated. For each winding a generator design is presented. By using FEM, the field distribution is calculated, which enables to estimate of the AC losses in order to make the overall performance of the four different machine designs becomes comparable.
AB - Defining the armature winding in a fully superconducting generator means to make a fundamental design decision. Especially when using High Temperature Superconductors (HTS), this decision becomes more challenging, because the design has to comply with the general machine design constraints and the behaivor of the superconductor, which can contradict each other.This paper aims to introduce four different fully superconducting machine designs with different armature windings. Therefore, an integer slot distributed winding, a one and a two layer concentrated winding and an airgap winding, are investigated. For each winding a generator design is presented. By using FEM, the field distribution is calculated, which enables to estimate of the AC losses in order to make the overall performance of the four different machine designs becomes comparable.
KW - armature winding
KW - fully superconducting
KW - HTS
KW - superconductor
KW - synchronous generator
UR - http://www.scopus.com/inward/record.url?scp=85127969999&partnerID=8YFLogxK
U2 - 10.1109/CPEEE54404.2022.9738712
DO - 10.1109/CPEEE54404.2022.9738712
M3 - Conference contribution
AN - SCOPUS:85127969999
SP - 49
EP - 53
BT - Proceedings of 2022 12th International Conference on Power, Energy and Electrical Engineering, CPEEE 2022
PB - Institute of Electrical and Electronics Engineers Inc.
T2 - 12th International Conference on Power, Energy and Electrical Engineering, CPEEE 2022
Y2 - 25 February 2022 through 27 February 2022
ER -