Details
| Originalsprache | Englisch |
|---|---|
| Seiten (von - bis) | 273-282 |
| Seitenumfang | 10 |
| Fachzeitschrift | Production Engineering |
| Jahrgang | 8 |
| Ausgabenummer | 3 |
| Frühes Online-Datum | 18 Dez. 2013 |
| Publikationsstatus | Veröffentlicht - Juni 2014 |
Abstract
Intermetallic iron-aluminum (FeAl) has an excellent resistance against corrosion and abrasion, a low density as well as high specific strength compared to conventional steel. In addition, the raw materials and manufacturing costs of FeAl-alloys are relatively low. The machinability is challenging. Economical machining of FeAl-alloys is currently not possible because of high tool wear. The chip formation mechanisms in machining FeAl-alloys are currently unknown. This study focuses on the influence of the material grain size on the thermomechanical processes during chip formation. A simultaneous measuring system for the determination of process forces, temperatures and chip formation in planing and orthogonal turning is presented. The chip formation mechanisms change with the grain transition and grain size. Decreasing grain sizes lead to the higher ductility in material separation by favorable thermomechanical loads and reduced crack initiation. By using force data from monocrystalline machining a model is introduced, which predicts the force dynamics in machining of polycrystals.
ASJC Scopus Sachgebiete
- Ingenieurwesen (insg.)
- Maschinenbau
- Ingenieurwesen (insg.)
- Wirtschaftsingenieurwesen und Fertigungstechnik
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
in: Production Engineering, Jahrgang 8, Nr. 3, 06.2014, S. 273-282.
Publikation: Beitrag in Fachzeitschrift › Artikel › Forschung › Peer-Review
}
TY - JOUR
T1 - Chip formation and modeling of dynamic force behavior in machining polycrystalline iron-aluminum
AU - Denkena, B.
AU - Stiffel, J. H.
AU - Hasselberg, E.
AU - Nespor, D.
N1 - Funding information: Acknowledgments We thank the German Research Foundation (DFG) for their financial support within the project ‘‘Wirkmechanis-men bei der Spanbildung der intermetallischen Legierung Fe3Al–Cr’’ (DE 447/79-1).
PY - 2014/6
Y1 - 2014/6
N2 - Intermetallic iron-aluminum (FeAl) has an excellent resistance against corrosion and abrasion, a low density as well as high specific strength compared to conventional steel. In addition, the raw materials and manufacturing costs of FeAl-alloys are relatively low. The machinability is challenging. Economical machining of FeAl-alloys is currently not possible because of high tool wear. The chip formation mechanisms in machining FeAl-alloys are currently unknown. This study focuses on the influence of the material grain size on the thermomechanical processes during chip formation. A simultaneous measuring system for the determination of process forces, temperatures and chip formation in planing and orthogonal turning is presented. The chip formation mechanisms change with the grain transition and grain size. Decreasing grain sizes lead to the higher ductility in material separation by favorable thermomechanical loads and reduced crack initiation. By using force data from monocrystalline machining a model is introduced, which predicts the force dynamics in machining of polycrystals.
AB - Intermetallic iron-aluminum (FeAl) has an excellent resistance against corrosion and abrasion, a low density as well as high specific strength compared to conventional steel. In addition, the raw materials and manufacturing costs of FeAl-alloys are relatively low. The machinability is challenging. Economical machining of FeAl-alloys is currently not possible because of high tool wear. The chip formation mechanisms in machining FeAl-alloys are currently unknown. This study focuses on the influence of the material grain size on the thermomechanical processes during chip formation. A simultaneous measuring system for the determination of process forces, temperatures and chip formation in planing and orthogonal turning is presented. The chip formation mechanisms change with the grain transition and grain size. Decreasing grain sizes lead to the higher ductility in material separation by favorable thermomechanical loads and reduced crack initiation. By using force data from monocrystalline machining a model is introduced, which predicts the force dynamics in machining of polycrystals.
KW - Chip formation
KW - Iron-aluminum
KW - Modeling
KW - Process forces
UR - http://www.scopus.com/inward/record.url?scp=84899996607&partnerID=8YFLogxK
U2 - 10.1007/s11740-013-0520-0
DO - 10.1007/s11740-013-0520-0
M3 - Article
AN - SCOPUS:84899996607
VL - 8
SP - 273
EP - 282
JO - Production Engineering
JF - Production Engineering
SN - 0944-6524
IS - 3
ER -