TY - JOUR

T1 - Challenges and Opportunities of Sentinel-1 InSAR for Transport Infrastructure Monitoring

AU - Piter, Andreas

AU - Haghshenas Haghighi, Mahmud

AU - Motagh, Mahdi

N1 - Publisher Copyright: © The Author(s) 2024.

PY - 2024/10

Y1 - 2024/10

N2 - Monitoring displacement at transport infrastructure using Sentinel‑1 Interferometric Synthetic Aperture Radar (InSAR) faces challenges due to the sensor’s medium spatial resolution, which limits the pixel coverage over the infrastructure. Therefore, carefully selecting coherent pixels is crucial to achieve a high density of reliable measurement points and to minimize noisy observations. This study evaluates the effectiveness of various pixel selection methods for displacement monitoring within transport infrastructures. We employ a two-step InSAR time series processing approach. First, high-quality first-order pixels are selected using temporal phase coherence (TPC) to estimate and correct atmospheric contributions. Then, a combination of different pixel selection methods is applied to identify coherent second-order pixels for displacement analysis. These methods include amplitude dispersion index (ADI), TPC, phase linking coherence (PLC), and top eigenvalue percentage (TEP), targeting both point-like scatterer (PS) and distributed scatterer (DS) pixels. Experiments are conducted in two case studies: one in Germany, characterized by dense vegetation, and one in Spain, with sparse vegetation. In Germany, the density of measurement points was approximately 30 points/km², with the longest segment of the infrastructure without any coherent pixels being 2.8 km. In Spain, the density of measurement points exceeded 500 points/km², with the longest section without coherent pixels being 700 meters. The results indicate that despite the challenges posed by medium-resolution data, the sensor is capable of providing adequate measurement points when suitable pixel selection methods are employed. However, careful consideration is necessary to exclude noisy pixels from the analysis. The findings highlight the importance of choosing a proper method tailored to infrastructure characteristics. Specifically, combining TPC and PLC methods offers a complementary set of pixels suitable for displacement measurements, whereas ADI and TEP are less effective in this context. This study demonstrates the potential of Sentinel‑1 InSAR for capturing both regional-scale and localized displacements at transport infrastructure.

AB - Monitoring displacement at transport infrastructure using Sentinel‑1 Interferometric Synthetic Aperture Radar (InSAR) faces challenges due to the sensor’s medium spatial resolution, which limits the pixel coverage over the infrastructure. Therefore, carefully selecting coherent pixels is crucial to achieve a high density of reliable measurement points and to minimize noisy observations. This study evaluates the effectiveness of various pixel selection methods for displacement monitoring within transport infrastructures. We employ a two-step InSAR time series processing approach. First, high-quality first-order pixels are selected using temporal phase coherence (TPC) to estimate and correct atmospheric contributions. Then, a combination of different pixel selection methods is applied to identify coherent second-order pixels for displacement analysis. These methods include amplitude dispersion index (ADI), TPC, phase linking coherence (PLC), and top eigenvalue percentage (TEP), targeting both point-like scatterer (PS) and distributed scatterer (DS) pixels. Experiments are conducted in two case studies: one in Germany, characterized by dense vegetation, and one in Spain, with sparse vegetation. In Germany, the density of measurement points was approximately 30 points/km², with the longest segment of the infrastructure without any coherent pixels being 2.8 km. In Spain, the density of measurement points exceeded 500 points/km², with the longest section without coherent pixels being 700 meters. The results indicate that despite the challenges posed by medium-resolution data, the sensor is capable of providing adequate measurement points when suitable pixel selection methods are employed. However, careful consideration is necessary to exclude noisy pixels from the analysis. The findings highlight the importance of choosing a proper method tailored to infrastructure characteristics. Specifically, combining TPC and PLC methods offers a complementary set of pixels suitable for displacement measurements, whereas ADI and TEP are less effective in this context. This study demonstrates the potential of Sentinel‑1 InSAR for capturing both regional-scale and localized displacements at transport infrastructure.

KW - InSAR

KW - Pixel selection

KW - Sentinel‑1

KW - Transport infrastructure

UR - http://www.scopus.com/inward/record.url?scp=85204010942&partnerID=8YFLogxK

U2 - 10.1007/s41064-024-00314-x

DO - 10.1007/s41064-024-00314-x

M3 - Article

AN - SCOPUS:85204010942

VL - 92

SP - 609

EP - 627

JO - PFG - Journal of Photogrammetry, Remote Sensing and Geoinformation Science

JF - PFG - Journal of Photogrammetry, Remote Sensing and Geoinformation Science

SN - 2512-2789

IS - 5

ER -