CFD simulation of nanofluid in a distribution transformer

Publikation: Beitrag in Buch/Bericht/Sammelwerk/KonferenzbandAufsatz in KonferenzbandForschungPeer-Review

Autoren

Externe Organisationen

  • Ferdowsi University of Mashhad (FUM)
Forschungs-netzwerk anzeigen

Details

OriginalspracheEnglisch
Titel des SammelwerksProceedings of the 21st International Symposium on High Voltage Engineering, Volume 2, ISH 2019
ErscheinungsortCham
Herausgeber (Verlag)Springer Nature
Seiten259-268
Seitenumfang10
ISBN (elektronisch)978-3-030-31680-8
ISBN (Print)9783030316792
PublikationsstatusVeröffentlicht - 2020
Veranstaltung21st International Symposium on High Voltage Engineering, ISH 2019 - Budapest, Ungarn
Dauer: 26 Aug. 201930 Aug. 2019

Publikationsreihe

NameLecture Notes in Electrical Engineering
Band599 LNEE
ISSN (Print)1876-1100
ISSN (elektronisch)1876-1119

Abstract

Since the last decade, fluids with suspended particles called “nanofluids”, have been employed as a new method of modifying the thermophysical properties of fluid in order to increase its heat transfer efficiency. Nanofluid has also the potential to be used in the transformer industry in order to improve the oil electrical and thermal properties, which leads to better performance and higher efficiency of the cooling system in the transformer. In this regard, the performance of oil-based nanofluid as the new generation of media for the application in liquid-filled transformers has been numerically evaluated in this research. Accordingly, the Fe3O4/oil nanofluid in weight ratio of 0.5 g/l was simulated as a homogeneous single phase flow with the temperature dependent thermophysical properties in a 200 kVA distribution transformer in three dimensions with all details of the active part, hollow fins and narrow oil channels. Then, the hotspot temperature, temperature and velocity distribution of Fe3O4/oil nanofluid were obtained and compared with those of pure mineral oil, in order to examine the performance of nanofluid. Based on the numerical results, the hotspot temperature with Fe3O4/oil is 2 °C lower than the mineral oil and the transformer experiences considerably lower temperature in the windings channels, which has been recognized as the thermally critical region in the transformer. So, the cooling system of a transformer with Fe3O4/oil expected to be more effective and efficient, helping the transformer to work in a more secure and reliable condition.

ASJC Scopus Sachgebiete

Zitieren

CFD simulation of nanofluid in a distribution transformer. / Raeisian, Leyla; Werle, Peter; Niazmand, Hamid.
Proceedings of the 21st International Symposium on High Voltage Engineering, Volume 2, ISH 2019. Cham: Springer Nature, 2020. S. 259-268 (Lecture Notes in Electrical Engineering; Band 599 LNEE).

Publikation: Beitrag in Buch/Bericht/Sammelwerk/KonferenzbandAufsatz in KonferenzbandForschungPeer-Review

Raeisian, L, Werle, P & Niazmand, H 2020, CFD simulation of nanofluid in a distribution transformer. in Proceedings of the 21st International Symposium on High Voltage Engineering, Volume 2, ISH 2019. Lecture Notes in Electrical Engineering, Bd. 599 LNEE, Springer Nature, Cham, S. 259-268, 21st International Symposium on High Voltage Engineering, ISH 2019, Budapest, Ungarn, 26 Aug. 2019. https://doi.org/10.1007/978-3-030-31680-8_27
Raeisian, L., Werle, P., & Niazmand, H. (2020). CFD simulation of nanofluid in a distribution transformer. In Proceedings of the 21st International Symposium on High Voltage Engineering, Volume 2, ISH 2019 (S. 259-268). (Lecture Notes in Electrical Engineering; Band 599 LNEE). Springer Nature. https://doi.org/10.1007/978-3-030-31680-8_27
Raeisian L, Werle P, Niazmand H. CFD simulation of nanofluid in a distribution transformer. in Proceedings of the 21st International Symposium on High Voltage Engineering, Volume 2, ISH 2019. Cham: Springer Nature. 2020. S. 259-268. (Lecture Notes in Electrical Engineering). Epub 2019 Okt 31. doi: 10.1007/978-3-030-31680-8_27
Raeisian, Leyla ; Werle, Peter ; Niazmand, Hamid. / CFD simulation of nanofluid in a distribution transformer. Proceedings of the 21st International Symposium on High Voltage Engineering, Volume 2, ISH 2019. Cham : Springer Nature, 2020. S. 259-268 (Lecture Notes in Electrical Engineering).
Download
@inproceedings{4b051b601bf24fcd9a0d3e6026d9f155,
title = "CFD simulation of nanofluid in a distribution transformer",
abstract = "Since the last decade, fluids with suspended particles called “nanofluids”, have been employed as a new method of modifying the thermophysical properties of fluid in order to increase its heat transfer efficiency. Nanofluid has also the potential to be used in the transformer industry in order to improve the oil electrical and thermal properties, which leads to better performance and higher efficiency of the cooling system in the transformer. In this regard, the performance of oil-based nanofluid as the new generation of media for the application in liquid-filled transformers has been numerically evaluated in this research. Accordingly, the Fe3O4/oil nanofluid in weight ratio of 0.5 g/l was simulated as a homogeneous single phase flow with the temperature dependent thermophysical properties in a 200 kVA distribution transformer in three dimensions with all details of the active part, hollow fins and narrow oil channels. Then, the hotspot temperature, temperature and velocity distribution of Fe3O4/oil nanofluid were obtained and compared with those of pure mineral oil, in order to examine the performance of nanofluid. Based on the numerical results, the hotspot temperature with Fe3O4/oil is 2 °C lower than the mineral oil and the transformer experiences considerably lower temperature in the windings channels, which has been recognized as the thermally critical region in the transformer. So, the cooling system of a transformer with Fe3O4/oil expected to be more effective and efficient, helping the transformer to work in a more secure and reliable condition.",
keywords = "Cooling system, Feo/oil nanofluid, Mineral oil, Transformer",
author = "Leyla Raeisian and Peter Werle and Hamid Niazmand",
year = "2020",
doi = "10.1007/978-3-030-31680-8_27",
language = "English",
isbn = "9783030316792",
series = "Lecture Notes in Electrical Engineering",
publisher = "Springer Nature",
pages = "259--268",
booktitle = "Proceedings of the 21st International Symposium on High Voltage Engineering, Volume 2, ISH 2019",
address = "United States",
note = "21st International Symposium on High Voltage Engineering, ISH 2019 ; Conference date: 26-08-2019 Through 30-08-2019",

}

Download

TY - GEN

T1 - CFD simulation of nanofluid in a distribution transformer

AU - Raeisian, Leyla

AU - Werle, Peter

AU - Niazmand, Hamid

PY - 2020

Y1 - 2020

N2 - Since the last decade, fluids with suspended particles called “nanofluids”, have been employed as a new method of modifying the thermophysical properties of fluid in order to increase its heat transfer efficiency. Nanofluid has also the potential to be used in the transformer industry in order to improve the oil electrical and thermal properties, which leads to better performance and higher efficiency of the cooling system in the transformer. In this regard, the performance of oil-based nanofluid as the new generation of media for the application in liquid-filled transformers has been numerically evaluated in this research. Accordingly, the Fe3O4/oil nanofluid in weight ratio of 0.5 g/l was simulated as a homogeneous single phase flow with the temperature dependent thermophysical properties in a 200 kVA distribution transformer in three dimensions with all details of the active part, hollow fins and narrow oil channels. Then, the hotspot temperature, temperature and velocity distribution of Fe3O4/oil nanofluid were obtained and compared with those of pure mineral oil, in order to examine the performance of nanofluid. Based on the numerical results, the hotspot temperature with Fe3O4/oil is 2 °C lower than the mineral oil and the transformer experiences considerably lower temperature in the windings channels, which has been recognized as the thermally critical region in the transformer. So, the cooling system of a transformer with Fe3O4/oil expected to be more effective and efficient, helping the transformer to work in a more secure and reliable condition.

AB - Since the last decade, fluids with suspended particles called “nanofluids”, have been employed as a new method of modifying the thermophysical properties of fluid in order to increase its heat transfer efficiency. Nanofluid has also the potential to be used in the transformer industry in order to improve the oil electrical and thermal properties, which leads to better performance and higher efficiency of the cooling system in the transformer. In this regard, the performance of oil-based nanofluid as the new generation of media for the application in liquid-filled transformers has been numerically evaluated in this research. Accordingly, the Fe3O4/oil nanofluid in weight ratio of 0.5 g/l was simulated as a homogeneous single phase flow with the temperature dependent thermophysical properties in a 200 kVA distribution transformer in three dimensions with all details of the active part, hollow fins and narrow oil channels. Then, the hotspot temperature, temperature and velocity distribution of Fe3O4/oil nanofluid were obtained and compared with those of pure mineral oil, in order to examine the performance of nanofluid. Based on the numerical results, the hotspot temperature with Fe3O4/oil is 2 °C lower than the mineral oil and the transformer experiences considerably lower temperature in the windings channels, which has been recognized as the thermally critical region in the transformer. So, the cooling system of a transformer with Fe3O4/oil expected to be more effective and efficient, helping the transformer to work in a more secure and reliable condition.

KW - Cooling system

KW - Feo/oil nanofluid

KW - Mineral oil

KW - Transformer

UR - http://www.scopus.com/inward/record.url?scp=85085060846&partnerID=8YFLogxK

U2 - 10.1007/978-3-030-31680-8_27

DO - 10.1007/978-3-030-31680-8_27

M3 - Conference contribution

AN - SCOPUS:85085060846

SN - 9783030316792

T3 - Lecture Notes in Electrical Engineering

SP - 259

EP - 268

BT - Proceedings of the 21st International Symposium on High Voltage Engineering, Volume 2, ISH 2019

PB - Springer Nature

CY - Cham

T2 - 21st International Symposium on High Voltage Engineering, ISH 2019

Y2 - 26 August 2019 through 30 August 2019

ER -

Von denselben Autoren