Details
| Titel in Übersetzung | Determination of yield stress and Hall-Petch coefficients of the tempering steel 42CrMo4 with different microstructure by means of indentation testing |
|---|---|
| Originalsprache | Deutsch |
| Seiten (von - bis) | 668-673 |
| Seitenumfang | 6 |
| Fachzeitschrift | Materialwissenschaft und Werkstofftechnik |
| Jahrgang | 37 |
| Ausgabenummer | 8 |
| Publikationsstatus | Veröffentlicht - Aug. 2006 |
Abstract
Yield stress of steels can be determined by tensile tests or by indentation testing. Indentation tests offer the advantage of measuring the yield stress of certain parts that otherwise could not be used to withdraw tensile samples. Furthermore, measurements in parts with a varying yield stress e.g. surface hardened steels can be carried out. This work investigates several methods of indentation tests to measure the yield stress of the tempering steel 42CrMo4. The yield stress of different microstructures is compared to results of tensile tests. Using the indentation test according to GOST 22762-77 the Hall-Petch coefficients of microstructures consisting of perlite and ferrite are determined. Thus the influence of grain size and distance of perlite lamellas on the yield stress can be taken into account.
Schlagwörter
- 42CrMo4, GOST 22762-77, Hall-Petch, Indentation testing, Yield stress
ASJC Scopus Sachgebiete
- Werkstoffwissenschaften (insg.)
- Allgemeine Materialwissenschaften
- Physik und Astronomie (insg.)
- Physik der kondensierten Materie
- Ingenieurwesen (insg.)
- Werkstoffmechanik
- Ingenieurwesen (insg.)
- Maschinenbau
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
in: Materialwissenschaft und Werkstofftechnik, Jahrgang 37, Nr. 8, 08.2006, S. 668-673.
Publikation: Beitrag in Fachzeitschrift › Artikel › Forschung › Peer-Review
}
TY - JOUR
T1 - Bestimmung der Streckgrenze und der Hall-Petch-konstanten des vergütungsstahles 42CrMo4 unterschiedlichen gefüges mittels eindruckprüfungen
AU - Bach, Fr W.
AU - Schaper, M.
AU - Nürnberger, F.
AU - Krause, Chr
AU - Grydin, O.
PY - 2006/8
Y1 - 2006/8
N2 - Yield stress of steels can be determined by tensile tests or by indentation testing. Indentation tests offer the advantage of measuring the yield stress of certain parts that otherwise could not be used to withdraw tensile samples. Furthermore, measurements in parts with a varying yield stress e.g. surface hardened steels can be carried out. This work investigates several methods of indentation tests to measure the yield stress of the tempering steel 42CrMo4. The yield stress of different microstructures is compared to results of tensile tests. Using the indentation test according to GOST 22762-77 the Hall-Petch coefficients of microstructures consisting of perlite and ferrite are determined. Thus the influence of grain size and distance of perlite lamellas on the yield stress can be taken into account.
AB - Yield stress of steels can be determined by tensile tests or by indentation testing. Indentation tests offer the advantage of measuring the yield stress of certain parts that otherwise could not be used to withdraw tensile samples. Furthermore, measurements in parts with a varying yield stress e.g. surface hardened steels can be carried out. This work investigates several methods of indentation tests to measure the yield stress of the tempering steel 42CrMo4. The yield stress of different microstructures is compared to results of tensile tests. Using the indentation test according to GOST 22762-77 the Hall-Petch coefficients of microstructures consisting of perlite and ferrite are determined. Thus the influence of grain size and distance of perlite lamellas on the yield stress can be taken into account.
KW - 42CrMo4
KW - GOST 22762-77
KW - Hall-Petch
KW - Indentation testing
KW - Yield stress
UR - http://www.scopus.com/inward/record.url?scp=33748415181&partnerID=8YFLogxK
U2 - 10.1002/mawe.200600044
DO - 10.1002/mawe.200600044
M3 - Artikel
AN - SCOPUS:33748415181
VL - 37
SP - 668
EP - 673
JO - Materialwissenschaft und Werkstofftechnik
JF - Materialwissenschaft und Werkstofftechnik
SN - 0933-5137
IS - 8
ER -