Details
| Originalsprache | Englisch |
|---|---|
| Seiten (von - bis) | 73-78 |
| Seitenumfang | 6 |
| Fachzeitschrift | CIRP annals |
| Jahrgang | 67 |
| Ausgabenummer | 1 |
| Frühes Online-Datum | 24 Mai 2018 |
| Publikationsstatus | Veröffentlicht - 2018 |
Abstract
Adapted cutting edge roundings lead to a performance increase of cutting tools. The optimal cutting edge design is determined by the thermomechanical process load and thus depends on the machined material. In this study, the external mechanical load is investigated in direct relation to material properties by means of microcinematography. It could be shown that load characteristics are mainly material independent, whereas the load level depends on the machined material. Finally, the findings were transferred into a model, which enables the design of cutting edge roundings based on material properties.
ASJC Scopus Sachgebiete
- Ingenieurwesen (insg.)
- Maschinenbau
- Ingenieurwesen (insg.)
- Wirtschaftsingenieurwesen und Fertigungstechnik
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
in: CIRP annals, Jahrgang 67, Nr. 1, 2018, S. 73-78.
Publikation: Beitrag in Fachzeitschrift › Artikel › Forschung › Peer-Review
}
TY - JOUR
T1 - Basic principles for the design of cutting edge roundings
AU - Bergmann, Benjamin
AU - Grove, Thilo
N1 - © 2018 Published by Elsevier Ltd on behalf of CIRP.
PY - 2018
Y1 - 2018
N2 - Adapted cutting edge roundings lead to a performance increase of cutting tools. The optimal cutting edge design is determined by the thermomechanical process load and thus depends on the machined material. In this study, the external mechanical load is investigated in direct relation to material properties by means of microcinematography. It could be shown that load characteristics are mainly material independent, whereas the load level depends on the machined material. Finally, the findings were transferred into a model, which enables the design of cutting edge roundings based on material properties.
AB - Adapted cutting edge roundings lead to a performance increase of cutting tools. The optimal cutting edge design is determined by the thermomechanical process load and thus depends on the machined material. In this study, the external mechanical load is investigated in direct relation to material properties by means of microcinematography. It could be shown that load characteristics are mainly material independent, whereas the load level depends on the machined material. Finally, the findings were transferred into a model, which enables the design of cutting edge roundings based on material properties.
KW - Cutting edge
KW - Design
KW - Modelling
UR - http://www.scopus.com/inward/record.url?scp=85047270044&partnerID=8YFLogxK
U2 - 10.1016/j.cirp.2018.04.019
DO - 10.1016/j.cirp.2018.04.019
M3 - Article
AN - SCOPUS:85047270044
VL - 67
SP - 73
EP - 78
JO - CIRP annals
JF - CIRP annals
SN - 0007-8506
IS - 1
ER -