Band Structure of Photonic Crystals Fabricated by Two-Photon Polymerization

Publikation: Beitrag in Fachzeitschrift › Artikel › Forschung › Peer-Review

Autoren

  • Mikhail V. Rybin
  • Ivan I. Shishkin
  • Kirill B. Samusev
  • Pavel A. Belov
  • Yuri S. Kivshar
  • Roman V. Kiyan
  • Boris N. Chichkov
  • Mikhail F. Limonov

Externe Organisationen

  • St. Petersburg National Research University of Information Technologies, Mechanics and Optics (ITMO)
  • RAS - Ioffe Physico Technical Institute
  • Australian National University
  • Laser Zentrum Hannover e.V. (LZH)
Forschungs-netzwerk anzeigen

Details

OriginalspracheEnglisch
Seiten (von - bis)61-73
Seitenumfang13
FachzeitschriftCRYSTALS
Jahrgang5
Ausgabenummer1
PublikationsstatusVeröffentlicht - 13 Jan. 2015
Extern publiziertJa

Abstract

We study theoretically the band-gap structures of several types of three-dimensional photonic crystals with the fcc lattice symmetry: synthetic opals, inverted yablonovite and woodpile. The samples of inverted yablonovite, inverted yablonovite with a glassy superstructure and woodpile are fabricated by two-photon polymerization through a direct laser writing technique, which allows the creation of complex three-dimensional photonic crystals with a resolution better than 100 nm. A material is polymerized along the trace of a moving laser focus, thus enabling the fabrication of any desirable three-dimensional structure by direct “recording” into the volume of a photosensitive material. The correspondence of the structures of the fabricated samples to the expected fcc lattices is confirmed by scanning electron microscopy. We discuss theoretically how the complete photonic band-gap is modified by structural and dielectric parameters. We demonstrate that the photonic properties of opal and yablonovite are opposite: the complete photonic band gap appears in the inverted opal, and direct yablonovite is absent in direct opal and inverted yablonovite.

ASJC Scopus Sachgebiete

Zitieren

Band Structure of Photonic Crystals Fabricated by Two-Photon Polymerization. / Rybin, Mikhail V.; Shishkin, Ivan I.; Samusev, Kirill B. et al.
in: CRYSTALS, Jahrgang 5, Nr. 1, 13.01.2015, S. 61-73.

Publikation: Beitrag in Fachzeitschrift › Artikel › Forschung › Peer-Review

Rybin, MV, Shishkin, II, Samusev, KB, Belov, PA, Kivshar, YS, Kiyan, RV, Chichkov, BN & Limonov, MF 2015, 'Band Structure of Photonic Crystals Fabricated by Two-Photon Polymerization', CRYSTALS, Jg. 5, Nr. 1, S. 61-73. https://doi.org/10.3390/cryst5010061
Rybin, M. V., Shishkin, I. I., Samusev, K. B., Belov, P. A., Kivshar, Y. S., Kiyan, R. V., Chichkov, B. N., & Limonov, M. F. (2015). Band Structure of Photonic Crystals Fabricated by Two-Photon Polymerization. CRYSTALS, 5(1), 61-73. https://doi.org/10.3390/cryst5010061
Rybin MV, Shishkin II, Samusev KB, Belov PA, Kivshar YS, Kiyan RV et al. Band Structure of Photonic Crystals Fabricated by Two-Photon Polymerization. CRYSTALS. 2015 Jan 13;5(1):61-73. doi: 10.3390/cryst5010061
Rybin, Mikhail V. ; Shishkin, Ivan I. ; Samusev, Kirill B. et al. / Band Structure of Photonic Crystals Fabricated by Two-Photon Polymerization. in: CRYSTALS. 2015 ; Jahrgang 5, Nr. 1. S. 61-73.
Download
@article{f7065c884ab04efd99453a2d45690082,
title = "Band Structure of Photonic Crystals Fabricated by Two-Photon Polymerization",
abstract = "We study theoretically the band-gap structures of several types of three-dimensional photonic crystals with the fcc lattice symmetry: synthetic opals, inverted yablonovite and woodpile. The samples of inverted yablonovite, inverted yablonovite with a glassy superstructure and woodpile are fabricated by two-photon polymerization through a direct laser writing technique, which allows the creation of complex three-dimensional photonic crystals with a resolution better than 100 nm. A material is polymerized along the trace of a moving laser focus, thus enabling the fabrication of any desirable three-dimensional structure by direct “recording” into the volume of a photosensitive material. The correspondence of the structures of the fabricated samples to the expected fcc lattices is confirmed by scanning electron microscopy. We discuss theoretically how the complete photonic band-gap is modified by structural and dielectric parameters. We demonstrate that the photonic properties of opal and yablonovite are opposite: the complete photonic band gap appears in the inverted opal, and direct yablonovite is absent in direct opal and inverted yablonovite.",
keywords = "Direct laser writing, Opal, Photonic crystals, Woodpile, Yablonovite",
author = "Rybin, {Mikhail V.} and Shishkin, {Ivan I.} and Samusev, {Kirill B.} and Belov, {Pavel A.} and Kivshar, {Yuri S.} and Kiyan, {Roman V.} and Chichkov, {Boris N.} and Limonov, {Mikhail F.}",
year = "2015",
month = jan,
day = "13",
doi = "10.3390/cryst5010061",
language = "English",
volume = "5",
pages = "61--73",
journal = "CRYSTALS",
issn = "2073-4352",
publisher = "Multidisciplinary Digital Publishing Institute",
number = "1",

}

Download

TY - JOUR

T1 - Band Structure of Photonic Crystals Fabricated by Two-Photon Polymerization

AU - Rybin, Mikhail V.

AU - Shishkin, Ivan I.

AU - Samusev, Kirill B.

AU - Belov, Pavel A.

AU - Kivshar, Yuri S.

AU - Kiyan, Roman V.

AU - Chichkov, Boris N.

AU - Limonov, Mikhail F.

PY - 2015/1/13

Y1 - 2015/1/13

N2 - We study theoretically the band-gap structures of several types of three-dimensional photonic crystals with the fcc lattice symmetry: synthetic opals, inverted yablonovite and woodpile. The samples of inverted yablonovite, inverted yablonovite with a glassy superstructure and woodpile are fabricated by two-photon polymerization through a direct laser writing technique, which allows the creation of complex three-dimensional photonic crystals with a resolution better than 100 nm. A material is polymerized along the trace of a moving laser focus, thus enabling the fabrication of any desirable three-dimensional structure by direct “recording” into the volume of a photosensitive material. The correspondence of the structures of the fabricated samples to the expected fcc lattices is confirmed by scanning electron microscopy. We discuss theoretically how the complete photonic band-gap is modified by structural and dielectric parameters. We demonstrate that the photonic properties of opal and yablonovite are opposite: the complete photonic band gap appears in the inverted opal, and direct yablonovite is absent in direct opal and inverted yablonovite.

AB - We study theoretically the band-gap structures of several types of three-dimensional photonic crystals with the fcc lattice symmetry: synthetic opals, inverted yablonovite and woodpile. The samples of inverted yablonovite, inverted yablonovite with a glassy superstructure and woodpile are fabricated by two-photon polymerization through a direct laser writing technique, which allows the creation of complex three-dimensional photonic crystals with a resolution better than 100 nm. A material is polymerized along the trace of a moving laser focus, thus enabling the fabrication of any desirable three-dimensional structure by direct “recording” into the volume of a photosensitive material. The correspondence of the structures of the fabricated samples to the expected fcc lattices is confirmed by scanning electron microscopy. We discuss theoretically how the complete photonic band-gap is modified by structural and dielectric parameters. We demonstrate that the photonic properties of opal and yablonovite are opposite: the complete photonic band gap appears in the inverted opal, and direct yablonovite is absent in direct opal and inverted yablonovite.

KW - Direct laser writing

KW - Opal

KW - Photonic crystals

KW - Woodpile

KW - Yablonovite

UR - http://www.scopus.com/inward/record.url?scp=84921291961&partnerID=8YFLogxK

U2 - 10.3390/cryst5010061

DO - 10.3390/cryst5010061

M3 - Article

AN - SCOPUS:84921291961

VL - 5

SP - 61

EP - 73

JO - CRYSTALS

JF - CRYSTALS

SN - 2073-4352

IS - 1

ER -