Details
| Originalsprache | Englisch |
|---|---|
| Aufsatznummer | 740638 |
| Fachzeitschrift | Frontiers in Earth Science |
| Jahrgang | 10 |
| Publikationsstatus | Veröffentlicht - 26 Apr. 2022 |
Abstract
An example of automated characterization and interpretation of the textural and compositional characteristics of solids phases in thin sections using machine learning (ML) is presented. In our study, we focus on the characterization of olivine in volcanic rocks, which is a phase that is often chemically zoned with variable Mg/(Mg + Fe) ratios, so-called magnesian number or mg#. As the olivine crystals represent only less than 10 vol% of the volcanic rock, a pre-processing step is necessary to automatically detect the phases of interest in the images on a pixel level, which is achieved using Deep Learning. A major contribution of the presented approach is to use backscattered electron (BSE) images to: 1) automatically segment all olivine crystals present in the thin section; 2) determine quantitatively their mg#; and 3) identify different populations depending on zoning type (e.g., normal vs reversal zoning) and textural characteristics (e.g., microlites vs phenocrysts). The segmentation of the olivine crystals is implemented with a pretrained fully convolutional neural network model with DeepLabV3 architecture. The model is trained to identify olivine crystals in backscattered electron images using automatically generated training data. The training data are generated automatically from images which can easily be created from X-Ray element maps. Once the olivines are identified in the BSE images, the relationship between BSE intensity value and mg# is determined using a simple regression based on a set of microprobe measurements. This learned functional relationship can then be applied to all olivine pixels of the thin section. If the highest possible map resolution (1 micron per 1 pixel) is selected for the data acquisition, the full processing time of an entire thin section of (Formula presented.) containing more than 1,500 phenocrysts and 20.000 microliths required 140 h of data acquisition (BSE + X-Ray element maps), 8 h of training and 16 h of segmentation and classification. Our further tests demonstrated that the 140 h of data acquisition can be reduced at least by a factor of 4 since only a part of the thin section area (25% or even less) needs to be used for training. The characterization of each additional thin section would only require the BSE data acquisition time (less than 48 h for a whole thin section), without an additional training step. The paper describes the training and processing in detail, shows analytical results and outlines the potential of this Deep Learning approach for petrological applications, resulting in the automatic characterization and interpretation of mineral textures and compositions with an unprecedented high resolution.
ASJC Scopus Sachgebiete
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
in: Frontiers in Earth Science, Jahrgang 10, 740638, 26.04.2022.
Publikation: Beitrag in Fachzeitschrift › Artikel › Forschung › Peer-Review
}
TY - JOUR
T1 - Automated Segmentation of Olivine Phenocrysts in a Volcanic Rock Thin Section Using a Fully Convolutional Neural Network
AU - Leichter, Artem
AU - Almeev, Renat R.
AU - Wittich, Dennis
AU - Beckmann, Philipp
AU - Rottensteiner, Franz
AU - Holtz, Francois
AU - Sester, Monika
N1 - Funding Information: This work has been conducted in the frame of the Forschungsgruppe FOR 2881 “Diffusion chronometry of magmatic systems” funded by the German Science Foundation (DFG). Discussions and comments by S. Chakraborty as well as comments and reviews by AE DP, AB, and MR greatly improved this study and manuscript. M. Oeser is thanked for his help with diffusion modeling.
PY - 2022/4/26
Y1 - 2022/4/26
N2 - An example of automated characterization and interpretation of the textural and compositional characteristics of solids phases in thin sections using machine learning (ML) is presented. In our study, we focus on the characterization of olivine in volcanic rocks, which is a phase that is often chemically zoned with variable Mg/(Mg + Fe) ratios, so-called magnesian number or mg#. As the olivine crystals represent only less than 10 vol% of the volcanic rock, a pre-processing step is necessary to automatically detect the phases of interest in the images on a pixel level, which is achieved using Deep Learning. A major contribution of the presented approach is to use backscattered electron (BSE) images to: 1) automatically segment all olivine crystals present in the thin section; 2) determine quantitatively their mg#; and 3) identify different populations depending on zoning type (e.g., normal vs reversal zoning) and textural characteristics (e.g., microlites vs phenocrysts). The segmentation of the olivine crystals is implemented with a pretrained fully convolutional neural network model with DeepLabV3 architecture. The model is trained to identify olivine crystals in backscattered electron images using automatically generated training data. The training data are generated automatically from images which can easily be created from X-Ray element maps. Once the olivines are identified in the BSE images, the relationship between BSE intensity value and mg# is determined using a simple regression based on a set of microprobe measurements. This learned functional relationship can then be applied to all olivine pixels of the thin section. If the highest possible map resolution (1 micron per 1 pixel) is selected for the data acquisition, the full processing time of an entire thin section of (Formula presented.) containing more than 1,500 phenocrysts and 20.000 microliths required 140 h of data acquisition (BSE + X-Ray element maps), 8 h of training and 16 h of segmentation and classification. Our further tests demonstrated that the 140 h of data acquisition can be reduced at least by a factor of 4 since only a part of the thin section area (25% or even less) needs to be used for training. The characterization of each additional thin section would only require the BSE data acquisition time (less than 48 h for a whole thin section), without an additional training step. The paper describes the training and processing in detail, shows analytical results and outlines the potential of this Deep Learning approach for petrological applications, resulting in the automatic characterization and interpretation of mineral textures and compositions with an unprecedented high resolution.
AB - An example of automated characterization and interpretation of the textural and compositional characteristics of solids phases in thin sections using machine learning (ML) is presented. In our study, we focus on the characterization of olivine in volcanic rocks, which is a phase that is often chemically zoned with variable Mg/(Mg + Fe) ratios, so-called magnesian number or mg#. As the olivine crystals represent only less than 10 vol% of the volcanic rock, a pre-processing step is necessary to automatically detect the phases of interest in the images on a pixel level, which is achieved using Deep Learning. A major contribution of the presented approach is to use backscattered electron (BSE) images to: 1) automatically segment all olivine crystals present in the thin section; 2) determine quantitatively their mg#; and 3) identify different populations depending on zoning type (e.g., normal vs reversal zoning) and textural characteristics (e.g., microlites vs phenocrysts). The segmentation of the olivine crystals is implemented with a pretrained fully convolutional neural network model with DeepLabV3 architecture. The model is trained to identify olivine crystals in backscattered electron images using automatically generated training data. The training data are generated automatically from images which can easily be created from X-Ray element maps. Once the olivines are identified in the BSE images, the relationship between BSE intensity value and mg# is determined using a simple regression based on a set of microprobe measurements. This learned functional relationship can then be applied to all olivine pixels of the thin section. If the highest possible map resolution (1 micron per 1 pixel) is selected for the data acquisition, the full processing time of an entire thin section of (Formula presented.) containing more than 1,500 phenocrysts and 20.000 microliths required 140 h of data acquisition (BSE + X-Ray element maps), 8 h of training and 16 h of segmentation and classification. Our further tests demonstrated that the 140 h of data acquisition can be reduced at least by a factor of 4 since only a part of the thin section area (25% or even less) needs to be used for training. The characterization of each additional thin section would only require the BSE data acquisition time (less than 48 h for a whole thin section), without an additional training step. The paper describes the training and processing in detail, shows analytical results and outlines the potential of this Deep Learning approach for petrological applications, resulting in the automatic characterization and interpretation of mineral textures and compositions with an unprecedented high resolution.
KW - artificial intelligence
KW - automated mineralogy
KW - BSE and X-Ray Maps
KW - CNN
KW - deep learning
KW - diffusion chronometry
KW - mineral analysis
KW - olivine zoning
UR - http://www.scopus.com/inward/record.url?scp=85130071328&partnerID=8YFLogxK
U2 - 10.3389/feart.2022.740638
DO - 10.3389/feart.2022.740638
M3 - Article
AN - SCOPUS:85130071328
VL - 10
JO - Frontiers in Earth Science
JF - Frontiers in Earth Science
SN - 2296-6463
M1 - 740638
ER -