Details
| Originalsprache | Englisch |
|---|---|
| Aufsatznummer | 71 |
| Seiten (von - bis) | 420-427 |
| Seitenumfang | 8 |
| Fachzeitschrift | Proceedings of SPIE - The International Society for Optical Engineering |
| Jahrgang | 5574 |
| Publikationsstatus | Veröffentlicht - 22 Okt. 2004 |
| Veranstaltung | Remote Sensing for Environmental Monitoring, GIS Applications, and Geology IV - Maspalomas, Spanien Dauer: 14 Sept. 2004 → 16 Sept. 2004 |
Abstract
A multiprocessor board for SAR raw data processing is presented. It has been designed especially for application on small platforms, e.g. UAVs. The challenges were to provide high processing power for real-time processing of SAR raw data on a small printed circuit board with low power consumption. These constraints can be met by a digital signal processor (DSP) like the HiPAR-DSP 16, which has been developed at the Laboratorium für Informationstechnologie. The multiprocessor board of the size of 230×160×20mm3 is equipped with six HiPAR-DSP 16 and has a maximum power consumption of less than 15 W. For generation of SAR images the ωk algorithm has been selected. It has been implemented for the HiPAR-DSP 16 and mapped to the multiprocessor board. Each HiPAR-DSP 16 receives one set of rangelines and returns the image data. A demonstration system emulates exactly the timing of the SAR sensor. In this way the multiprocessor board works in a real environment. The SAR images generated by the multiprocessor board can be stored and displayed. The resulting images have been compared to images generated by the reference code.
ASJC Scopus Sachgebiete
- Werkstoffwissenschaften (insg.)
- Elektronische, optische und magnetische Materialien
- Physik und Astronomie (insg.)
- Physik der kondensierten Materie
- Informatik (insg.)
- Angewandte Informatik
- Mathematik (insg.)
- Angewandte Mathematik
- Ingenieurwesen (insg.)
- Elektrotechnik und Elektronik
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
in: Proceedings of SPIE - The International Society for Optical Engineering, Jahrgang 5574, 71, 22.10.2004, S. 420-427.
Publikation: Beitrag in Fachzeitschrift › Konferenzaufsatz in Fachzeitschrift › Forschung › Peer-Review
}
TY - JOUR
T1 - An on-board real-time SAR processor for small platforms
AU - Simon-Klar, C.
AU - Kirscht, M.
AU - Langemeyer, S.
AU - Nolte, N.
AU - Pirsch, P.
PY - 2004/10/22
Y1 - 2004/10/22
N2 - A multiprocessor board for SAR raw data processing is presented. It has been designed especially for application on small platforms, e.g. UAVs. The challenges were to provide high processing power for real-time processing of SAR raw data on a small printed circuit board with low power consumption. These constraints can be met by a digital signal processor (DSP) like the HiPAR-DSP 16, which has been developed at the Laboratorium für Informationstechnologie. The multiprocessor board of the size of 230×160×20mm3 is equipped with six HiPAR-DSP 16 and has a maximum power consumption of less than 15 W. For generation of SAR images the ωk algorithm has been selected. It has been implemented for the HiPAR-DSP 16 and mapped to the multiprocessor board. Each HiPAR-DSP 16 receives one set of rangelines and returns the image data. A demonstration system emulates exactly the timing of the SAR sensor. In this way the multiprocessor board works in a real environment. The SAR images generated by the multiprocessor board can be stored and displayed. The resulting images have been compared to images generated by the reference code.
AB - A multiprocessor board for SAR raw data processing is presented. It has been designed especially for application on small platforms, e.g. UAVs. The challenges were to provide high processing power for real-time processing of SAR raw data on a small printed circuit board with low power consumption. These constraints can be met by a digital signal processor (DSP) like the HiPAR-DSP 16, which has been developed at the Laboratorium für Informationstechnologie. The multiprocessor board of the size of 230×160×20mm3 is equipped with six HiPAR-DSP 16 and has a maximum power consumption of less than 15 W. For generation of SAR images the ωk algorithm has been selected. It has been implemented for the HiPAR-DSP 16 and mapped to the multiprocessor board. Each HiPAR-DSP 16 receives one set of rangelines and returns the image data. A demonstration system emulates exactly the timing of the SAR sensor. In this way the multiprocessor board works in a real environment. The SAR images generated by the multiprocessor board can be stored and displayed. The resulting images have been compared to images generated by the reference code.
KW - ωk algorithm
KW - HiPAR-DSP 16
KW - Multi DSP board, UAV
KW - Real-time SAR processor
KW - Wavenumber domain
UR - http://www.scopus.com/inward/record.url?scp=17644398231&partnerID=8YFLogxK
U2 - 10.1117/12.565823
DO - 10.1117/12.565823
M3 - Conference article
AN - SCOPUS:17644398231
VL - 5574
SP - 420
EP - 427
JO - Proceedings of SPIE - The International Society for Optical Engineering
JF - Proceedings of SPIE - The International Society for Optical Engineering
SN - 0277-786X
M1 - 71
T2 - Remote Sensing for Environmental Monitoring, GIS Applications, and Geology IV
Y2 - 14 September 2004 through 16 September 2004
ER -