Details
Originalsprache | Englisch |
---|---|
Aufsatznummer | 8624208 |
Seiten (von - bis) | 120-128 |
Seitenumfang | 9 |
Fachzeitschrift | IEEE Transactions on Dielectrics and Electrical Insulation |
Jahrgang | 26 |
Ausgabenummer | 1 |
Publikationsstatus | Veröffentlicht - Feb. 2019 |
Abstract
This paper introduces an improved arc model for vacuum arcs. In this model, the impact of different high-current anode modes is considered. An existence diagram for different high-current anode modes including footpoint, anode spot type 1 and type 2 is determined using emission spectroscopy, high-speed camera, and electrical measurements. During transition from diffuse to the high-current mode the arc voltage will be affected due to high evaporation rate, which can affect dielectric recovery of vacuum interrupter. Conventional arc models cannot trace the corresponding sudden changes in the arc voltage during the transition to anode spot type 2. Therefore, different areas of discharge modes are determined based on the threshold current and gap length for AC 50 Hz and cylindrical contacts made of CuCr7525. The physical parameters of the arc, e.g. the arc temperature, contact geometry and material is considered as implicit parameters in the existence diagrams. The boundaries of the areas are used as a user-defined library in EMTP-RV for a new electric arc model. The voltage behavior of the arc can be predicted well in a larger range of peak currents by the results. The validity of the model is also investigated for AC 100 Hz and pulsed DC 10 ms.
ASJC Scopus Sachgebiete
- Ingenieurwesen (insg.)
- Elektrotechnik und Elektronik
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
in: IEEE Transactions on Dielectrics and Electrical Insulation, Jahrgang 26, Nr. 1, 8624208, 02.2019, S. 120-128.
Publikation: Beitrag in Fachzeitschrift › Artikel › Forschung › Peer-Review
}
TY - JOUR
T1 - An Improved Arc Model for Vacuum Arc Regarding Anode Spot Modes
AU - Khakpour, Alireza
AU - Imani, Mohammad Taghi
AU - Franke, Stefen
AU - Gortschakow, Sergey
AU - Methling, Ralf-Peter
AU - Uhrlandt, Dirk
N1 - Publisher Copyright: © 1994-2012 IEEE. Copyright: Copyright 2019 Elsevier B.V., All rights reserved.
PY - 2019/2
Y1 - 2019/2
N2 - This paper introduces an improved arc model for vacuum arcs. In this model, the impact of different high-current anode modes is considered. An existence diagram for different high-current anode modes including footpoint, anode spot type 1 and type 2 is determined using emission spectroscopy, high-speed camera, and electrical measurements. During transition from diffuse to the high-current mode the arc voltage will be affected due to high evaporation rate, which can affect dielectric recovery of vacuum interrupter. Conventional arc models cannot trace the corresponding sudden changes in the arc voltage during the transition to anode spot type 2. Therefore, different areas of discharge modes are determined based on the threshold current and gap length for AC 50 Hz and cylindrical contacts made of CuCr7525. The physical parameters of the arc, e.g. the arc temperature, contact geometry and material is considered as implicit parameters in the existence diagrams. The boundaries of the areas are used as a user-defined library in EMTP-RV for a new electric arc model. The voltage behavior of the arc can be predicted well in a larger range of peak currents by the results. The validity of the model is also investigated for AC 100 Hz and pulsed DC 10 ms.
AB - This paper introduces an improved arc model for vacuum arcs. In this model, the impact of different high-current anode modes is considered. An existence diagram for different high-current anode modes including footpoint, anode spot type 1 and type 2 is determined using emission spectroscopy, high-speed camera, and electrical measurements. During transition from diffuse to the high-current mode the arc voltage will be affected due to high evaporation rate, which can affect dielectric recovery of vacuum interrupter. Conventional arc models cannot trace the corresponding sudden changes in the arc voltage during the transition to anode spot type 2. Therefore, different areas of discharge modes are determined based on the threshold current and gap length for AC 50 Hz and cylindrical contacts made of CuCr7525. The physical parameters of the arc, e.g. the arc temperature, contact geometry and material is considered as implicit parameters in the existence diagrams. The boundaries of the areas are used as a user-defined library in EMTP-RV for a new electric arc model. The voltage behavior of the arc can be predicted well in a larger range of peak currents by the results. The validity of the model is also investigated for AC 100 Hz and pulsed DC 10 ms.
KW - anode modes
KW - arc voltage
KW - displacement curve
KW - vacuum arc
UR - http://www.scopus.com/inward/record.url?scp=85060618243&partnerID=8YFLogxK
U2 - 10.1109/TDEI.2018.007587
DO - 10.1109/TDEI.2018.007587
M3 - Article
VL - 26
SP - 120
EP - 128
JO - IEEE Transactions on Dielectrics and Electrical Insulation
JF - IEEE Transactions on Dielectrics and Electrical Insulation
SN - 1070-9878
IS - 1
M1 - 8624208
ER -