Details
| Originalsprache | Englisch |
|---|---|
| Seiten (von - bis) | 261-264 |
| Seitenumfang | 4 |
| Fachzeitschrift | Steel research international |
| Jahrgang | 76 |
| Ausgabenummer | 2-3 |
| Publikationsstatus | Veröffentlicht - Feb. 2005 |
Abstract
Iron-Aluminium-Alloys show high potential as a material for automotive and aerospace applications due to their combination of properties. In comparison with other iron-based alloys the lower density and good mechanical properties lead to a higher specific strength, which makes them interesting for lightweight applications. These alloys also have a good to outstanding resistance to oxidation and sulfidation. Nevertheless their use is restricted because of limited knowledge regarding the machining of these materials. New tool and cutting technologies have to be developed to counteract this situation. For example, a successful industrial introduction of a 10 wt% Al iron-aluminium alloy would require a cutting tool lifetime 10 to 100 times higher than the currently achievable. For this purpose, the characteristic wear effects at the cutting edge have to be understood and the alternating changes of chip formation by constant process parameters have to be explained. Reasons and remedies are discussed.
ASJC Scopus Sachgebiete
- Physik und Astronomie (insg.)
- Physik der kondensierten Materie
- Chemie (insg.)
- Physikalische und Theoretische Chemie
- Werkstoffwissenschaften (insg.)
- Metalle und Legierungen
- Werkstoffwissenschaften (insg.)
- Werkstoffchemie
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
in: Steel research international, Jahrgang 76, Nr. 2-3, 02.2005, S. 261-264.
Publikation: Beitrag in Fachzeitschrift › Artikel › Forschung › Peer-Review
}
TY - JOUR
T1 - An Assessment of the Machinability of Iron-Rich Iron-Aluminium Alloys
AU - Denkena, Berend
AU - Tönshoff, Hans Kurt
AU - Boehnke, David
PY - 2005/2
Y1 - 2005/2
N2 - Iron-Aluminium-Alloys show high potential as a material for automotive and aerospace applications due to their combination of properties. In comparison with other iron-based alloys the lower density and good mechanical properties lead to a higher specific strength, which makes them interesting for lightweight applications. These alloys also have a good to outstanding resistance to oxidation and sulfidation. Nevertheless their use is restricted because of limited knowledge regarding the machining of these materials. New tool and cutting technologies have to be developed to counteract this situation. For example, a successful industrial introduction of a 10 wt% Al iron-aluminium alloy would require a cutting tool lifetime 10 to 100 times higher than the currently achievable. For this purpose, the characteristic wear effects at the cutting edge have to be understood and the alternating changes of chip formation by constant process parameters have to be explained. Reasons and remedies are discussed.
AB - Iron-Aluminium-Alloys show high potential as a material for automotive and aerospace applications due to their combination of properties. In comparison with other iron-based alloys the lower density and good mechanical properties lead to a higher specific strength, which makes them interesting for lightweight applications. These alloys also have a good to outstanding resistance to oxidation and sulfidation. Nevertheless their use is restricted because of limited knowledge regarding the machining of these materials. New tool and cutting technologies have to be developed to counteract this situation. For example, a successful industrial introduction of a 10 wt% Al iron-aluminium alloy would require a cutting tool lifetime 10 to 100 times higher than the currently achievable. For this purpose, the characteristic wear effects at the cutting edge have to be understood and the alternating changes of chip formation by constant process parameters have to be explained. Reasons and remedies are discussed.
KW - Chip formation
KW - Cutting forces
KW - Iron-aluminium-alloys
KW - Machinability
KW - Properties
KW - Tool wear
KW - Turning
UR - http://www.scopus.com/inward/record.url?scp=14644388876&partnerID=8YFLogxK
U2 - 10.1002/srin.200506007
DO - 10.1002/srin.200506007
M3 - Article
AN - SCOPUS:14644388876
VL - 76
SP - 261
EP - 264
JO - Steel research international
JF - Steel research international
SN - 1611-3683
IS - 2-3
ER -