Details
| Originalsprache | Englisch |
|---|---|
| Aufsatznummer | 7033415 |
| Seiten (von - bis) | 448-455 |
| Seitenumfang | 8 |
| Fachzeitschrift | IEEE Transactions on Dielectrics and Electrical Insulation |
| Jahrgang | 22 |
| Ausgabenummer | 1 |
| Publikationsstatus | Veröffentlicht - 1 Feb. 2015 |
Abstract
Partial discharge (PD) detection in the ultra-high frequency (UHF) range is state of the art. One of the most critical points in this detection method is adopting proper and suitable antenna design. In this paper, a new design of UHF antennas is introduced which is suitable to be used on the transformers in the HV laboratories of the manufacturers. To ensure the applicability of the new antenna, experimental UHF PD measurements are carried out on a transformer tank model as well as on the real power transformers. Installing several UHF antennas on the transformer tank to perform defect localization is also an important issue. There are rigorous limitations and lack of the places to install the antennas. This problem is almost solved by using the mentioned new antenna design. The proper positioning of the antennas is the other critical point in the UHF method. Placing the antennas in improper positions will damage the localization accuracy. In this paper, an automatic algorithm is introduced to determine the best installation positions for the antennas to enhance the localization accuracy. The efficacy of this algorithm is investigated by using the results of experimental measurements on power transformers.
ASJC Scopus Sachgebiete
- Ingenieurwesen (insg.)
- Elektrotechnik und Elektronik
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
in: IEEE Transactions on Dielectrics and Electrical Insulation, Jahrgang 22, Nr. 1, 7033415, 01.02.2015, S. 448-455.
Publikation: Beitrag in Fachzeitschrift › Artikel › Forschung › Peer-Review
}
TY - JOUR
T1 - Advancing new techniques for UHF PDdetection and localization in the power transformers in the factory tests
AU - Mirzaei, H.
AU - Akbari, A.
AU - Gockenbach, E.
AU - Miralikhani , Karim
PY - 2015/2/1
Y1 - 2015/2/1
N2 - Partial discharge (PD) detection in the ultra-high frequency (UHF) range is state of the art. One of the most critical points in this detection method is adopting proper and suitable antenna design. In this paper, a new design of UHF antennas is introduced which is suitable to be used on the transformers in the HV laboratories of the manufacturers. To ensure the applicability of the new antenna, experimental UHF PD measurements are carried out on a transformer tank model as well as on the real power transformers. Installing several UHF antennas on the transformer tank to perform defect localization is also an important issue. There are rigorous limitations and lack of the places to install the antennas. This problem is almost solved by using the mentioned new antenna design. The proper positioning of the antennas is the other critical point in the UHF method. Placing the antennas in improper positions will damage the localization accuracy. In this paper, an automatic algorithm is introduced to determine the best installation positions for the antennas to enhance the localization accuracy. The efficacy of this algorithm is investigated by using the results of experimental measurements on power transformers.
AB - Partial discharge (PD) detection in the ultra-high frequency (UHF) range is state of the art. One of the most critical points in this detection method is adopting proper and suitable antenna design. In this paper, a new design of UHF antennas is introduced which is suitable to be used on the transformers in the HV laboratories of the manufacturers. To ensure the applicability of the new antenna, experimental UHF PD measurements are carried out on a transformer tank model as well as on the real power transformers. Installing several UHF antennas on the transformer tank to perform defect localization is also an important issue. There are rigorous limitations and lack of the places to install the antennas. This problem is almost solved by using the mentioned new antenna design. The proper positioning of the antennas is the other critical point in the UHF method. Placing the antennas in improper positions will damage the localization accuracy. In this paper, an automatic algorithm is introduced to determine the best installation positions for the antennas to enhance the localization accuracy. The efficacy of this algorithm is investigated by using the results of experimental measurements on power transformers.
KW - Partial discharge
KW - power transformer
KW - UHF antenna
KW - ultra-high frequency
UR - http://www.scopus.com/inward/record.url?scp=84923082633&partnerID=8YFLogxK
U2 - 10.1109/TDEI.2014.004249
DO - 10.1109/TDEI.2014.004249
M3 - Article
AN - SCOPUS:84923082633
VL - 22
SP - 448
EP - 455
JO - IEEE Transactions on Dielectrics and Electrical Insulation
JF - IEEE Transactions on Dielectrics and Electrical Insulation
SN - 1070-9878
IS - 1
M1 - 7033415
ER -