Details
| Originalsprache | Englisch |
|---|---|
| Seiten (von - bis) | 336-340 |
| Seitenumfang | 5 |
| Fachzeitschrift | Procedia CIRP |
| Jahrgang | 94 |
| Frühes Online-Datum | 15 Sept. 2020 |
| Publikationsstatus | Veröffentlicht - 2020 |
| Extern publiziert | Ja |
| Veranstaltung | 11th CIRP Conference on Photonic Technologies, LANE 2020 - Virtual, Online Dauer: 7 Sept. 2020 → 10 Sept. 2020 |
Abstract
Additive manufacturing of metals has become a leading technology for function-integrated and individualized components. Ongoing research leverages this technology from single-material parts to gradient compositions and multi-material combinations. Powder-based laser metal deposition is the preferred process for these novel applications because of the ability to add onto freeform surfaces and flexible material use. A crucial aspect of this powder-based process is material loss due to overspray. Furthermore, the shape and size of the powder stream must be altered depending on the intended use. For example, thin walls and fine details require a narrow powder focus whereas a larger focus can accelerate the manufacturing of volumes substantially. To address this challenge, novel 3D printable and replaceable nozzles are developed. Compared to common nozzle designs, this new approach enables quick changing of different sized nozzles and incorporates additively manufactured flow paths. Finally, the stream quality is visualized by Schlieren photography.
ASJC Scopus Sachgebiete
- Ingenieurwesen (insg.)
- Steuerungs- und Systemtechnik
- Ingenieurwesen (insg.)
- Wirtschaftsingenieurwesen und Fertigungstechnik
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
in: Procedia CIRP, Jahrgang 94, 2020, S. 336-340.
Publikation: Beitrag in Fachzeitschrift › Konferenzaufsatz in Fachzeitschrift › Forschung › Peer-Review
}
TY - JOUR
T1 - Additive manufacturing of LMD nozzles for multi-material processing
AU - Bernhard, R.
AU - Neef, P.
AU - Eismann, T.
AU - Wiche, H.
AU - Hoff, C.
AU - Hermsdorf, J.
AU - Kaierle, S.
AU - Wesling, V.
N1 - Funding Information: We thank the European Regional Development Fund (ERDF) and the Ministry for Science and Culture of Lower Saxony for the funding and support. Duration of implementation: 01.07.2018 – 30.06.2021 Project number: ZW6-8501 8048 (wGROTESK)
PY - 2020
Y1 - 2020
N2 - Additive manufacturing of metals has become a leading technology for function-integrated and individualized components. Ongoing research leverages this technology from single-material parts to gradient compositions and multi-material combinations. Powder-based laser metal deposition is the preferred process for these novel applications because of the ability to add onto freeform surfaces and flexible material use. A crucial aspect of this powder-based process is material loss due to overspray. Furthermore, the shape and size of the powder stream must be altered depending on the intended use. For example, thin walls and fine details require a narrow powder focus whereas a larger focus can accelerate the manufacturing of volumes substantially. To address this challenge, novel 3D printable and replaceable nozzles are developed. Compared to common nozzle designs, this new approach enables quick changing of different sized nozzles and incorporates additively manufactured flow paths. Finally, the stream quality is visualized by Schlieren photography.
AB - Additive manufacturing of metals has become a leading technology for function-integrated and individualized components. Ongoing research leverages this technology from single-material parts to gradient compositions and multi-material combinations. Powder-based laser metal deposition is the preferred process for these novel applications because of the ability to add onto freeform surfaces and flexible material use. A crucial aspect of this powder-based process is material loss due to overspray. Furthermore, the shape and size of the powder stream must be altered depending on the intended use. For example, thin walls and fine details require a narrow powder focus whereas a larger focus can accelerate the manufacturing of volumes substantially. To address this challenge, novel 3D printable and replaceable nozzles are developed. Compared to common nozzle designs, this new approach enables quick changing of different sized nozzles and incorporates additively manufactured flow paths. Finally, the stream quality is visualized by Schlieren photography.
KW - Additive manufacturing
KW - Laser metal deposition
KW - Nozzle design
UR - http://www.scopus.com/inward/record.url?scp=85093361605&partnerID=8YFLogxK
U2 - 10.1016/j.procir.2020.09.063
DO - 10.1016/j.procir.2020.09.063
M3 - Conference article
AN - SCOPUS:85093361605
VL - 94
SP - 336
EP - 340
JO - Procedia CIRP
JF - Procedia CIRP
SN - 2212-8271
T2 - 11th CIRP Conference on Photonic Technologies, LANE 2020
Y2 - 7 September 2020 through 10 September 2020
ER -