Loading [MathJax]/extensions/tex2jax.js

Additive manufacturing of glass materials for the production of optical, thermal and structural components

Publikation: Beitrag in Buch/Bericht/Sammelwerk/Konferenzband › Beitrag in Buch/Sammelwerk › Forschung › Peer-Review

Autorschaft

  • Katharina Rettschlag
  • Fabian Kranert
  • Moritz Hinkelmann
  • Peter Jäschke
  • Stefan Kaierle
  • Roland Lachmayer

Organisationseinheiten

Externe Organisationen

  • Laser Zentrum Hannover e.V. (LZH)

Details

OriginalspracheEnglisch
Titel des SammelwerksGenerative Manufacturing of Optical, Thermal and Structural Components (GROTESK)
ErscheinungsortCham
Herausgeber (Verlag)Springer International Publishing AG
Seiten1-23
Seitenumfang23
ISBN (elektronisch)9783030965013
ISBN (Print)9783030965006
PublikationsstatusVeröffentlicht - 14 Apr. 2022

Abstract

Additive manufacturing of optical, thermal and structural components requires a combination of different matched manufacturing processes. A new process development, which has only been investigated in research and development for a few years, is the additive manufacturing of glass materials. A wide diversity of approaches are being investigated and implemented in this area. In order to specifically manufacture optical components from a pure glass material without the use of binders, the process of fiber-based laser glass deposition is used as part of this work. This process makes it possible to add functional waveguides in previously impossible shapes, spherical lenses and solids additively on a glass substrate.

ASJC Scopus Sachgebiete

Zitieren

Additive manufacturing of glass materials for the production of optical, thermal and structural components. / Rettschlag, Katharina; Kranert, Fabian; Hinkelmann, Moritz et al.
Generative Manufacturing of Optical, Thermal and Structural Components (GROTESK). Cham: Springer International Publishing AG, 2022. S. 1-23.

Publikation: Beitrag in Buch/Bericht/Sammelwerk/Konferenzband › Beitrag in Buch/Sammelwerk › Forschung › Peer-Review

Rettschlag, K, Kranert, F, Hinkelmann, M, Jäschke, P, Kaierle, S & Lachmayer, R 2022, Additive manufacturing of glass materials for the production of optical, thermal and structural components. in Generative Manufacturing of Optical, Thermal and Structural Components (GROTESK). Springer International Publishing AG, Cham, S. 1-23. https://doi.org/10.1007/978-3-030-96501-3_1
Rettschlag, K., Kranert, F., Hinkelmann, M., Jäschke, P., Kaierle, S., & Lachmayer, R. (2022). Additive manufacturing of glass materials for the production of optical, thermal and structural components. In Generative Manufacturing of Optical, Thermal and Structural Components (GROTESK) (S. 1-23). Springer International Publishing AG. https://doi.org/10.1007/978-3-030-96501-3_1
Rettschlag K, Kranert F, Hinkelmann M, Jäschke P, Kaierle S, Lachmayer R. Additive manufacturing of glass materials for the production of optical, thermal and structural components. in Generative Manufacturing of Optical, Thermal and Structural Components (GROTESK). Cham: Springer International Publishing AG. 2022. S. 1-23 doi: 10.1007/978-3-030-96501-3_1
Rettschlag, Katharina ; Kranert, Fabian ; Hinkelmann, Moritz et al. / Additive manufacturing of glass materials for the production of optical, thermal and structural components. Generative Manufacturing of Optical, Thermal and Structural Components (GROTESK). Cham : Springer International Publishing AG, 2022. S. 1-23
Download
@inbook{8f4feed77c314a6ea6e1314085427721,
title = "Additive manufacturing of glass materials for the production of optical, thermal and structural components",
abstract = "Additive manufacturing of optical, thermal and structural components requires a combination of different matched manufacturing processes. A new process development, which has only been investigated in research and development for a few years, is the additive manufacturing of glass materials. A wide diversity of approaches are being investigated and implemented in this area. In order to specifically manufacture optical components from a pure glass material without the use of binders, the process of fiber-based laser glass deposition is used as part of this work. This process makes it possible to add functional waveguides in previously impossible shapes, spherical lenses and solids additively on a glass substrate.",
keywords = "Additive manufacturing, Fused silica, Laser Glass Deposition, Spherical lenses, Waveguides",
author = "Katharina Rettschlag and Fabian Kranert and Moritz Hinkelmann and Peter J{\"a}schke and Stefan Kaierle and Roland Lachmayer",
note = "This work was carried out within the framework of the EFRE—NBank funded project {"}GROTESK—Generative Manufacturing of Optical, Thermal and Structural Components{"} by the subproject oGROTESK (ZW6-85018307) and sGROTESK (ZW6-85017815).",
year = "2022",
month = apr,
day = "14",
doi = "10.1007/978-3-030-96501-3_1",
language = "English",
isbn = "9783030965006",
pages = "1--23",
booktitle = "Generative Manufacturing of Optical, Thermal and Structural Components (GROTESK)",
publisher = "Springer International Publishing AG",
address = "Switzerland",

}

Download

TY - CHAP

T1 - Additive manufacturing of glass materials for the production of optical, thermal and structural components

AU - Rettschlag, Katharina

AU - Kranert, Fabian

AU - Hinkelmann, Moritz

AU - Jäschke, Peter

AU - Kaierle, Stefan

AU - Lachmayer, Roland

N1 - This work was carried out within the framework of the EFRE—NBank funded project "GROTESK—Generative Manufacturing of Optical, Thermal and Structural Components" by the subproject oGROTESK (ZW6-85018307) and sGROTESK (ZW6-85017815).

PY - 2022/4/14

Y1 - 2022/4/14

N2 - Additive manufacturing of optical, thermal and structural components requires a combination of different matched manufacturing processes. A new process development, which has only been investigated in research and development for a few years, is the additive manufacturing of glass materials. A wide diversity of approaches are being investigated and implemented in this area. In order to specifically manufacture optical components from a pure glass material without the use of binders, the process of fiber-based laser glass deposition is used as part of this work. This process makes it possible to add functional waveguides in previously impossible shapes, spherical lenses and solids additively on a glass substrate.

AB - Additive manufacturing of optical, thermal and structural components requires a combination of different matched manufacturing processes. A new process development, which has only been investigated in research and development for a few years, is the additive manufacturing of glass materials. A wide diversity of approaches are being investigated and implemented in this area. In order to specifically manufacture optical components from a pure glass material without the use of binders, the process of fiber-based laser glass deposition is used as part of this work. This process makes it possible to add functional waveguides in previously impossible shapes, spherical lenses and solids additively on a glass substrate.

KW - Additive manufacturing

KW - Fused silica

KW - Laser Glass Deposition

KW - Spherical lenses

KW - Waveguides

UR - http://www.scopus.com/inward/record.url?scp=85159056904&partnerID=8YFLogxK

U2 - 10.1007/978-3-030-96501-3_1

DO - 10.1007/978-3-030-96501-3_1

M3 - Contribution to book/anthology

AN - SCOPUS:85159056904

SN - 9783030965006

SP - 1

EP - 23

BT - Generative Manufacturing of Optical, Thermal and Structural Components (GROTESK)

PB - Springer International Publishing AG

CY - Cham

ER -