Details
| Originalsprache | Englisch |
|---|---|
| Titel des Sammelwerks | Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2009, DETC2009 |
| Seiten | 247-254 |
| Seitenumfang | 8 |
| Publikationsstatus | Veröffentlicht - 29 Juli 2010 |
| Veranstaltung | 2009 ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC2009 - San Diego, CA, USA / Vereinigte Staaten Dauer: 30 Aug. 2009 → 2 Sept. 2009 |
Publikationsreihe
| Name | Proceedings of the ASME Design Engineering Technical Conference |
|---|---|
| Band | 3 |
Abstract
The adaptronic precision positioning technology is applied to the fitting of rotation-symmetric components such as gearwheels in a hard turning process in order to compensate eccentricity. Distorted gearwheels, showing e.g. a significant quench distortion, cause a malposition in the chuck during clamping. This malposition leads to low quality workpieces or scrap in the hard turning process. To compensate the malposition of the workpieces, a new technology for precision positioning within the rotating chuck is being researched. In the introduction, the motivation of the preceding research project "Allowance-oriented precision positioning" and the framework of the adaptronic precision positioning technology are summarized. Next part is the description of the system's components, beginning with the principles and the redesign of the mechatronic chuck. Completing the adaptronic precision positioning technology, the optical metrology, the data processing and automation aspects are shown in the following part. Afterwards, a short summary concludes this paper.
ASJC Scopus Sachgebiete
- Informatik (insg.)
- Computernetzwerke und -kommunikation
- Informatik (insg.)
- Hardware und Architektur
- Ingenieurwesen (insg.)
- Elektrotechnik und Elektronik
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2009, DETC2009. 2010. S. 247-254 (Proceedings of the ASME Design Engineering Technical Conference; Band 3).
Publikation: Beitrag in Buch/Bericht/Sammelwerk/Konferenzband › Aufsatz in Konferenzband › Forschung › Peer-Review
}
TY - GEN
T1 - Adaptronic precision positioning technology
AU - Pahlke, Achim
AU - Kästner, Markus
AU - Reithmeier, Eduard
AU - Rosen, Simon
AU - Möhring, Hans Christian
AU - Denkena, Berend
PY - 2010/7/29
Y1 - 2010/7/29
N2 - The adaptronic precision positioning technology is applied to the fitting of rotation-symmetric components such as gearwheels in a hard turning process in order to compensate eccentricity. Distorted gearwheels, showing e.g. a significant quench distortion, cause a malposition in the chuck during clamping. This malposition leads to low quality workpieces or scrap in the hard turning process. To compensate the malposition of the workpieces, a new technology for precision positioning within the rotating chuck is being researched. In the introduction, the motivation of the preceding research project "Allowance-oriented precision positioning" and the framework of the adaptronic precision positioning technology are summarized. Next part is the description of the system's components, beginning with the principles and the redesign of the mechatronic chuck. Completing the adaptronic precision positioning technology, the optical metrology, the data processing and automation aspects are shown in the following part. Afterwards, a short summary concludes this paper.
AB - The adaptronic precision positioning technology is applied to the fitting of rotation-symmetric components such as gearwheels in a hard turning process in order to compensate eccentricity. Distorted gearwheels, showing e.g. a significant quench distortion, cause a malposition in the chuck during clamping. This malposition leads to low quality workpieces or scrap in the hard turning process. To compensate the malposition of the workpieces, a new technology for precision positioning within the rotating chuck is being researched. In the introduction, the motivation of the preceding research project "Allowance-oriented precision positioning" and the framework of the adaptronic precision positioning technology are summarized. Next part is the description of the system's components, beginning with the principles and the redesign of the mechatronic chuck. Completing the adaptronic precision positioning technology, the optical metrology, the data processing and automation aspects are shown in the following part. Afterwards, a short summary concludes this paper.
UR - http://www.scopus.com/inward/record.url?scp=77953698647&partnerID=8YFLogxK
U2 - 10.1115/DETC2009-86658
DO - 10.1115/DETC2009-86658
M3 - Conference contribution
AN - SCOPUS:77953698647
SN - 9780791849002
T3 - Proceedings of the ASME Design Engineering Technical Conference
SP - 247
EP - 254
BT - Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2009, DETC2009
T2 - 2009 ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC2009
Y2 - 30 August 2009 through 2 September 2009
ER -