Details
| Originalsprache | Englisch |
|---|---|
| Titel des Sammelwerks | Precision Assembly Technologies and Systems |
| Untertitel | 5th IFIP WG 5.5 International Precision Assembly Seminar, IPAS 2010, Chamonix, France, February 14-17, 2010. Proceedings |
| Seiten | 191-198 |
| Seitenumfang | 8 |
| Publikationsstatus | Veröffentlicht - 2010 |
| Extern publiziert | Ja |
Publikationsreihe
| Name | IFIP Advances in Information and Communication Technology |
|---|---|
| Band | 315 |
| ISSN (Print) | 1868-4238 |
Abstract
Precision assembly of hybrid micro systems requires not only a high precision handling and adjusting of the parts but also a highly accurate and fast bonding technique. In this field adhesive technology is one of the major joining techniques. At the Collaboration Research Center 516, a batch process based on a joining technique using hot melt adhesives was developed. This technique allows the coating of micro components with hot melt in a batch. The coating process is followed by the joining process. Due to this, the time between coating and joining can be designed variably. Because of the short set times of hot melt adhesives short joining times are possible. For this assembly process adapted heat management and adapted gripper systems are very important. Primarily, the conception and construction of suitable grippers, which realize the complex requirements of the heat management, meet a high challenge. This paper presents an active gripper system for the joining of micro parts using hot melt adhesives. Furthermore, first examinations and results of an assembly process using this gripper for bonding with hot melt adhesives are presented.
ASJC Scopus Sachgebiete
- Entscheidungswissenschaften (insg.)
- Informationssysteme und -management
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
Precision Assembly Technologies and Systems: 5th IFIP WG 5.5 International Precision Assembly Seminar, IPAS 2010, Chamonix, France, February 14-17, 2010. Proceedings. 2010. S. 191-198 (IFIP Advances in Information and Communication Technology; Band 315).
Publikation: Beitrag in Buch/Bericht/Sammelwerk/Konferenzband › Beitrag in Buch/Sammelwerk › Forschung › Peer-Review
}
TY - CHAP
T1 - Active gripper for hot melt joining of micro components
AU - Rathmann, Sven
AU - Raatz, Annika
AU - Hesselbach, Jürgen
PY - 2010
Y1 - 2010
N2 - Precision assembly of hybrid micro systems requires not only a high precision handling and adjusting of the parts but also a highly accurate and fast bonding technique. In this field adhesive technology is one of the major joining techniques. At the Collaboration Research Center 516, a batch process based on a joining technique using hot melt adhesives was developed. This technique allows the coating of micro components with hot melt in a batch. The coating process is followed by the joining process. Due to this, the time between coating and joining can be designed variably. Because of the short set times of hot melt adhesives short joining times are possible. For this assembly process adapted heat management and adapted gripper systems are very important. Primarily, the conception and construction of suitable grippers, which realize the complex requirements of the heat management, meet a high challenge. This paper presents an active gripper system for the joining of micro parts using hot melt adhesives. Furthermore, first examinations and results of an assembly process using this gripper for bonding with hot melt adhesives are presented.
AB - Precision assembly of hybrid micro systems requires not only a high precision handling and adjusting of the parts but also a highly accurate and fast bonding technique. In this field adhesive technology is one of the major joining techniques. At the Collaboration Research Center 516, a batch process based on a joining technique using hot melt adhesives was developed. This technique allows the coating of micro components with hot melt in a batch. The coating process is followed by the joining process. Due to this, the time between coating and joining can be designed variably. Because of the short set times of hot melt adhesives short joining times are possible. For this assembly process adapted heat management and adapted gripper systems are very important. Primarily, the conception and construction of suitable grippers, which realize the complex requirements of the heat management, meet a high challenge. This paper presents an active gripper system for the joining of micro parts using hot melt adhesives. Furthermore, first examinations and results of an assembly process using this gripper for bonding with hot melt adhesives are presented.
KW - Active gripper systems
KW - Hot melt adhesives
KW - Precision joining operations
UR - http://www.scopus.com/inward/record.url?scp=76749116689&partnerID=8YFLogxK
U2 - 10.1007/978-3-642-11598-1_22
DO - 10.1007/978-3-642-11598-1_22
M3 - Contribution to book/anthology
AN - SCOPUS:76749116689
SN - 9783642115974
T3 - IFIP Advances in Information and Communication Technology
SP - 191
EP - 198
BT - Precision Assembly Technologies and Systems
ER -