Details
| Originalsprache | Englisch |
|---|---|
| Titel des Sammelwerks | ASME 2012 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2012 |
| Seiten | 313-320 |
| Seitenumfang | 8 |
| Publikationsstatus | Veröffentlicht - 1 Dez. 2012 |
| Extern publiziert | Ja |
| Veranstaltung | ASME 2012 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2012 - Stone Mountain, GA, USA / Vereinigte Staaten Dauer: 19 Sept. 2012 → 21 Sept. 2012 |
Publikationsreihe
| Name | ASME 2012 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2012 |
|---|---|
| Band | 2 |
Abstract
The challenge of producing high performance, productive and precise machine tools must be accepted by the machine tool industry. These requirements can be reached by increasing the grinding machine parameters, such as the cut depth or the feed rate. Both will increase the grinding force during the grinding process, and can result in an excitation of the machine structure. Based on this excitation, the machine structure shows an undesired dynamic behavior which can result in machine vibrations. These vibrations can cause chatter marks on the workpiece surface, and if large enough can result in a stop in production. To minimize the chance of this situation, the machine user often chooses machine parameters which will not excite the machine structure. This is a disadvantage, because the machine design allows much more efficiency. To employ the complete efficiency of the design, this paper presents an approach which allows the active reduction of possible vibrations during a grinding process.
ASJC Scopus Sachgebiete
- Informatik (insg.)
- Artificial intelligence
- Ingenieurwesen (insg.)
- Tief- und Ingenieurbau
- Ingenieurwesen (insg.)
- Werkstoffmechanik
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
ASME 2012 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2012. 2012. S. 313-320 (ASME 2012 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2012; Band 2).
Publikation: Beitrag in Buch/Bericht/Sammelwerk/Konferenzband › Aufsatz in Konferenzband › Forschung › Peer-Review
}
TY - GEN
T1 - A design of an active tool holding device
AU - Boldering, Alexander L.
AU - Raatz, Annika
PY - 2012/12/1
Y1 - 2012/12/1
N2 - The challenge of producing high performance, productive and precise machine tools must be accepted by the machine tool industry. These requirements can be reached by increasing the grinding machine parameters, such as the cut depth or the feed rate. Both will increase the grinding force during the grinding process, and can result in an excitation of the machine structure. Based on this excitation, the machine structure shows an undesired dynamic behavior which can result in machine vibrations. These vibrations can cause chatter marks on the workpiece surface, and if large enough can result in a stop in production. To minimize the chance of this situation, the machine user often chooses machine parameters which will not excite the machine structure. This is a disadvantage, because the machine design allows much more efficiency. To employ the complete efficiency of the design, this paper presents an approach which allows the active reduction of possible vibrations during a grinding process.
AB - The challenge of producing high performance, productive and precise machine tools must be accepted by the machine tool industry. These requirements can be reached by increasing the grinding machine parameters, such as the cut depth or the feed rate. Both will increase the grinding force during the grinding process, and can result in an excitation of the machine structure. Based on this excitation, the machine structure shows an undesired dynamic behavior which can result in machine vibrations. These vibrations can cause chatter marks on the workpiece surface, and if large enough can result in a stop in production. To minimize the chance of this situation, the machine user often chooses machine parameters which will not excite the machine structure. This is a disadvantage, because the machine design allows much more efficiency. To employ the complete efficiency of the design, this paper presents an approach which allows the active reduction of possible vibrations during a grinding process.
UR - http://www.scopus.com/inward/record.url?scp=84892652216&partnerID=8YFLogxK
U2 - 10.1115/SMASIS2012-7931
DO - 10.1115/SMASIS2012-7931
M3 - Conference contribution
AN - SCOPUS:84892652216
SN - 9780791845103
T3 - ASME 2012 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2012
SP - 313
EP - 320
BT - ASME 2012 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2012
T2 - ASME 2012 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2012
Y2 - 19 September 2012 through 21 September 2012
ER -