A benchmark for variably saturated variable-density variable-viscosity flow and solute transport in porous media

Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

Autoren

  • Carlos R. Guevara Morel
  • Thomas Graf

Externe Organisationen

  • Bundesanstalt für Geowissenschaften und Rohstoffe (BGR)
Forschungs-netzwerk anzeigen

Details

OriginalspracheEnglisch
Seiten (von - bis)1903-1919
Seitenumfang17
FachzeitschriftHydrogeology journal
Jahrgang31
Ausgabenummer7
Frühes Online-Datum15 Aug. 2023
PublikationsstatusVeröffentlicht - Nov. 2023

Abstract

In natural environments, fluid density and viscosity can be affected by spatial and temporal variations of solute concentration, for example, due to saltwater intrusion in coastal aquifers, leachate infiltration from waste disposal sites, and upconing of saline water from deep aquifers. Potentially unstable situations may arise in which a dense fluid overlies a less dense fluid. This situation can produce instabilities manifested by dense plume fingers moving vertically downwards counterbalanced by vertical upward flow of the less dense fluid. The resulting free convection increases solute transport rates over large distances and times relative to constant-density flow. Unstable brine flow is further complicated if the porous medium is variably saturated. The results from a laboratory experiment of variably saturated variable-density flow and solute transport from Simmons et al. (2002) are used as the physical basis to define a new mathematical benchmark. This benchmark aims at realistically reproducing the experimental fingering patterns. Random hydraulic conductivity fields were used in the simulations as a numerical perturbation method to realistically mimic the observed dense plume fingering. The HydroGeoSphere code coupled with PEST are used to calibrate the parameter set that defines the benchmark. A grid convergence analysis is performed to obtain the adequate spatial and temporal discretizations. The new mathematical benchmark is useful for model comparison and testing of variably saturated variable-density flow in porous media. Simmons CT, Pierini ML, Hutson JL (2002) Laboratory investigation of variable-density flow and solute transport in unsaturated–saturated porous media. Transp Porous Media. 47(2): 215–244, 10.1023/A:1015568724369.

ASJC Scopus Sachgebiete

Zitieren

A benchmark for variably saturated variable-density variable-viscosity flow and solute transport in porous media. / Guevara Morel, Carlos R.; Graf, Thomas.
in: Hydrogeology journal, Jahrgang 31, Nr. 7, 11.2023, S. 1903-1919.

Publikation: Beitrag in FachzeitschriftArtikelForschungPeer-Review

Guevara Morel CR, Graf T. A benchmark for variably saturated variable-density variable-viscosity flow and solute transport in porous media. Hydrogeology journal. 2023 Nov;31(7):1903-1919. Epub 2023 Aug 15. doi: 10.1007/s10040-023-02673-y
Guevara Morel, Carlos R. ; Graf, Thomas. / A benchmark for variably saturated variable-density variable-viscosity flow and solute transport in porous media. in: Hydrogeology journal. 2023 ; Jahrgang 31, Nr. 7. S. 1903-1919.
Download
@article{be7b458e6b9d40b19bffbbdaec7ab7cb,
title = "A benchmark for variably saturated variable-density variable-viscosity flow and solute transport in porous media",
abstract = "In natural environments, fluid density and viscosity can be affected by spatial and temporal variations of solute concentration, for example, due to saltwater intrusion in coastal aquifers, leachate infiltration from waste disposal sites, and upconing of saline water from deep aquifers. Potentially unstable situations may arise in which a dense fluid overlies a less dense fluid. This situation can produce instabilities manifested by dense plume fingers moving vertically downwards counterbalanced by vertical upward flow of the less dense fluid. The resulting free convection increases solute transport rates over large distances and times relative to constant-density flow. Unstable brine flow is further complicated if the porous medium is variably saturated. The results from a laboratory experiment of variably saturated variable-density flow and solute transport from Simmons et al. (2002) are used as the physical basis to define a new mathematical benchmark. This benchmark aims at realistically reproducing the experimental fingering patterns. Random hydraulic conductivity fields were used in the simulations as a numerical perturbation method to realistically mimic the observed dense plume fingering. The HydroGeoSphere code coupled with PEST are used to calibrate the parameter set that defines the benchmark. A grid convergence analysis is performed to obtain the adequate spatial and temporal discretizations. The new mathematical benchmark is useful for model comparison and testing of variably saturated variable-density flow in porous media. Simmons CT, Pierini ML, Hutson JL (2002) Laboratory investigation of variable-density flow and solute transport in unsaturated–saturated porous media. Transp Porous Media. 47(2): 215–244, 10.1023/A:1015568724369.",
keywords = "Benchmark, Contamination, Numerical modeling, Variable-density flow, Variably saturated",
author = "{Guevara Morel}, {Carlos R.} and Thomas Graf",
note = "Funding Information: Open Access funding enabled and organized by Projekt DEAL. This research was supported by the Deutsche Forschungsgemeinschaft (DFG) under Grant No. GR 3463/2-1. ",
year = "2023",
month = nov,
doi = "10.1007/s10040-023-02673-y",
language = "English",
volume = "31",
pages = "1903--1919",
journal = "Hydrogeology journal",
issn = "1431-2174",
publisher = "Springer Heidelberg",
number = "7",

}

Download

TY - JOUR

T1 - A benchmark for variably saturated variable-density variable-viscosity flow and solute transport in porous media

AU - Guevara Morel, Carlos R.

AU - Graf, Thomas

N1 - Funding Information: Open Access funding enabled and organized by Projekt DEAL. This research was supported by the Deutsche Forschungsgemeinschaft (DFG) under Grant No. GR 3463/2-1.

PY - 2023/11

Y1 - 2023/11

N2 - In natural environments, fluid density and viscosity can be affected by spatial and temporal variations of solute concentration, for example, due to saltwater intrusion in coastal aquifers, leachate infiltration from waste disposal sites, and upconing of saline water from deep aquifers. Potentially unstable situations may arise in which a dense fluid overlies a less dense fluid. This situation can produce instabilities manifested by dense plume fingers moving vertically downwards counterbalanced by vertical upward flow of the less dense fluid. The resulting free convection increases solute transport rates over large distances and times relative to constant-density flow. Unstable brine flow is further complicated if the porous medium is variably saturated. The results from a laboratory experiment of variably saturated variable-density flow and solute transport from Simmons et al. (2002) are used as the physical basis to define a new mathematical benchmark. This benchmark aims at realistically reproducing the experimental fingering patterns. Random hydraulic conductivity fields were used in the simulations as a numerical perturbation method to realistically mimic the observed dense plume fingering. The HydroGeoSphere code coupled with PEST are used to calibrate the parameter set that defines the benchmark. A grid convergence analysis is performed to obtain the adequate spatial and temporal discretizations. The new mathematical benchmark is useful for model comparison and testing of variably saturated variable-density flow in porous media. Simmons CT, Pierini ML, Hutson JL (2002) Laboratory investigation of variable-density flow and solute transport in unsaturated–saturated porous media. Transp Porous Media. 47(2): 215–244, 10.1023/A:1015568724369.

AB - In natural environments, fluid density and viscosity can be affected by spatial and temporal variations of solute concentration, for example, due to saltwater intrusion in coastal aquifers, leachate infiltration from waste disposal sites, and upconing of saline water from deep aquifers. Potentially unstable situations may arise in which a dense fluid overlies a less dense fluid. This situation can produce instabilities manifested by dense plume fingers moving vertically downwards counterbalanced by vertical upward flow of the less dense fluid. The resulting free convection increases solute transport rates over large distances and times relative to constant-density flow. Unstable brine flow is further complicated if the porous medium is variably saturated. The results from a laboratory experiment of variably saturated variable-density flow and solute transport from Simmons et al. (2002) are used as the physical basis to define a new mathematical benchmark. This benchmark aims at realistically reproducing the experimental fingering patterns. Random hydraulic conductivity fields were used in the simulations as a numerical perturbation method to realistically mimic the observed dense plume fingering. The HydroGeoSphere code coupled with PEST are used to calibrate the parameter set that defines the benchmark. A grid convergence analysis is performed to obtain the adequate spatial and temporal discretizations. The new mathematical benchmark is useful for model comparison and testing of variably saturated variable-density flow in porous media. Simmons CT, Pierini ML, Hutson JL (2002) Laboratory investigation of variable-density flow and solute transport in unsaturated–saturated porous media. Transp Porous Media. 47(2): 215–244, 10.1023/A:1015568724369.

KW - Benchmark

KW - Contamination

KW - Numerical modeling

KW - Variable-density flow

KW - Variably saturated

UR - http://www.scopus.com/inward/record.url?scp=85167794206&partnerID=8YFLogxK

U2 - 10.1007/s10040-023-02673-y

DO - 10.1007/s10040-023-02673-y

M3 - Article

AN - SCOPUS:85167794206

VL - 31

SP - 1903

EP - 1919

JO - Hydrogeology journal

JF - Hydrogeology journal

SN - 1431-2174

IS - 7

ER -