Details
| Originalsprache | Englisch |
|---|---|
| Titel des Sammelwerks | Components and Packaging for Laser Systems VI |
| Herausgeber/-innen | Alexei L. Glebov, Paul O. Leisher |
| Erscheinungsort | Bellingham |
| Herausgeber (Verlag) | SPIE |
| Seitenumfang | 13 |
| ISBN (elektronisch) | 9781510632851 |
| Publikationsstatus | Veröffentlicht - 21 Feb. 2020 |
| Veranstaltung | Components and Packaging for Laser Systems VI 2020 - San Francisco, USA / Vereinigte Staaten Dauer: 3 Feb. 2020 → 5 Feb. 2020 |
Publikationsreihe
| Name | Proceedings of SPIE - The International Society for Optical Engineering |
|---|---|
| Band | 11261 |
| ISSN (Print) | 0277-786X |
| ISSN (elektronisch) | 1996-756X |
Abstract
The use of additive manufacturing methods in research and industry has led to the possibility of designing more compact, light and low-cost assemblies. In the field of laser development, new opportunities resulting from additive manufacturing have rarely been considered so far. We present a compact, lightweight solid-state amplifier system for low-power applications where the optomechanical components are manufactured completely additive via Fused Filament Fabrication (FFF). The amplifier system is based on a Nd:YVO4-crystal pumped with an external, fiber-coupled diode at a wavelength of 808nm and a maximum output power of 3 W. The seed source is a Nd:YVO4-crystal based solid-state laser with an emission wavelength of 1064 nm. The commercial optical components, such as lenses and crystal, are firmly imprinted via FFF in the optomechanics and thus secured against misalignment. Additionally, sensor technology for temperature measurement is implemented into the devices. The use of FFF, in which the components are printed from polymers, results in a lightweight yet stable construction. We have shown, that optical components can be imprinted without adding mechanical stress. To increase the mechanical and thermal robustness of the system different types of polymers as well as post process treatments are tested and the use of Laser Metal Deposition for this application is investigated. The thermal stability of the printed structures is evaluated to determine the maximum power level of the system without damaging the polymer-optomechanics. Furthermore, output power, optical-to-optical efficiency, beam pointing, and beam shape are measured for several on-and off-switching processes as well as long-term operation.
ASJC Scopus Sachgebiete
- Werkstoffwissenschaften (insg.)
- Elektronische, optische und magnetische Materialien
- Physik und Astronomie (insg.)
- Physik der kondensierten Materie
- Informatik (insg.)
- Angewandte Informatik
- Mathematik (insg.)
- Angewandte Mathematik
- Ingenieurwesen (insg.)
- Elektrotechnik und Elektronik
Zitieren
- Standard
- Harvard
- Apa
- Vancouver
- BibTex
- RIS
Components and Packaging for Laser Systems VI. Hrsg. / Alexei L. Glebov; Paul O. Leisher. Bellingham: SPIE, 2020. 1126105 (Proceedings of SPIE - The International Society for Optical Engineering; Band 11261).
Publikation: Beitrag in Buch/Bericht/Sammelwerk/Konferenzband › Aufsatz in Konferenzband › Forschung › Peer-Review
}
TY - GEN
T1 - 3D-printed, low-cost, lightweight optomechanics for a compact, low-power solid-state amplifier system
AU - Kranert, Fabian
AU - Budde, Jana
AU - Neef, Philipp
AU - Bernhard, Robert
AU - Lammers, Marius
AU - Rettschlag, Katharina
AU - Grabe, Tobias
AU - Wienke, Andreas
AU - Neumann, Jörg
AU - Wiche, Henning
AU - Wesling, Volker
AU - Ahlers, Henning
AU - Lachmayer, Roland
AU - Kracht, DIetmar
N1 - Funding information: The experiments were conducted within the framework of the project “GROTESK – Generative Fertigung op-tischer, thermaler und struktureller Komponenten” funded by EFRE – NBank (ZW6-85018307, ZW6-85017815, ZW6-85017913, ZW6-85018048).
PY - 2020/2/21
Y1 - 2020/2/21
N2 - The use of additive manufacturing methods in research and industry has led to the possibility of designing more compact, light and low-cost assemblies. In the field of laser development, new opportunities resulting from additive manufacturing have rarely been considered so far. We present a compact, lightweight solid-state amplifier system for low-power applications where the optomechanical components are manufactured completely additive via Fused Filament Fabrication (FFF). The amplifier system is based on a Nd:YVO4-crystal pumped with an external, fiber-coupled diode at a wavelength of 808nm and a maximum output power of 3 W. The seed source is a Nd:YVO4-crystal based solid-state laser with an emission wavelength of 1064 nm. The commercial optical components, such as lenses and crystal, are firmly imprinted via FFF in the optomechanics and thus secured against misalignment. Additionally, sensor technology for temperature measurement is implemented into the devices. The use of FFF, in which the components are printed from polymers, results in a lightweight yet stable construction. We have shown, that optical components can be imprinted without adding mechanical stress. To increase the mechanical and thermal robustness of the system different types of polymers as well as post process treatments are tested and the use of Laser Metal Deposition for this application is investigated. The thermal stability of the printed structures is evaluated to determine the maximum power level of the system without damaging the polymer-optomechanics. Furthermore, output power, optical-to-optical efficiency, beam pointing, and beam shape are measured for several on-and off-switching processes as well as long-term operation.
AB - The use of additive manufacturing methods in research and industry has led to the possibility of designing more compact, light and low-cost assemblies. In the field of laser development, new opportunities resulting from additive manufacturing have rarely been considered so far. We present a compact, lightweight solid-state amplifier system for low-power applications where the optomechanical components are manufactured completely additive via Fused Filament Fabrication (FFF). The amplifier system is based on a Nd:YVO4-crystal pumped with an external, fiber-coupled diode at a wavelength of 808nm and a maximum output power of 3 W. The seed source is a Nd:YVO4-crystal based solid-state laser with an emission wavelength of 1064 nm. The commercial optical components, such as lenses and crystal, are firmly imprinted via FFF in the optomechanics and thus secured against misalignment. Additionally, sensor technology for temperature measurement is implemented into the devices. The use of FFF, in which the components are printed from polymers, results in a lightweight yet stable construction. We have shown, that optical components can be imprinted without adding mechanical stress. To increase the mechanical and thermal robustness of the system different types of polymers as well as post process treatments are tested and the use of Laser Metal Deposition for this application is investigated. The thermal stability of the printed structures is evaluated to determine the maximum power level of the system without damaging the polymer-optomechanics. Furthermore, output power, optical-to-optical efficiency, beam pointing, and beam shape are measured for several on-and off-switching processes as well as long-term operation.
KW - 3D-printed optomechanics
KW - Additive manufacturing
KW - Compact and lightweight optomechanics
KW - Packaging and mounting of optical components
KW - Solid-state amplifier
UR - http://www.scopus.com/inward/record.url?scp=85083713555&partnerID=8YFLogxK
U2 - 10.1117/12.2544268
DO - 10.1117/12.2544268
M3 - Conference contribution
AN - SCOPUS:85083713555
T3 - Proceedings of SPIE - The International Society for Optical Engineering
BT - Components and Packaging for Laser Systems VI
A2 - Glebov, Alexei L.
A2 - Leisher, Paul O.
PB - SPIE
CY - Bellingham
T2 - Components and Packaging for Laser Systems VI 2020
Y2 - 3 February 2020 through 5 February 2020
ER -