3D building change detection using high resolution stereo images and a GIS database

Publikation: Beitrag in FachzeitschriftKonferenzaufsatz in FachzeitschriftForschungPeer-Review

Autoren

  • G. R. Dini
  • K. Jacobsen
  • F. Rottensteiner
  • M. Al Rajhi
  • C. Heipke

Externe Organisationen

  • Ministry of Municipal and Rural Affairs
Forschungs-netzwerk anzeigen

Details

OriginalspracheEnglisch
Seiten (von - bis)299-304
Seitenumfang6
FachzeitschriftInternational Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences - ISPRS Archives
Jahrgang39
PublikationsstatusVeröffentlicht - 1 Aug. 2012
Veranstaltung22nd Congress of the International Society for Photogrammetry and Remote Sensing, ISPRS 2012 - Melbourne, Australien
Dauer: 25 Aug. 20121 Sept. 2012

Abstract

In this paper, a workflow is proposed to detect 3D building changes in urban and sub-urban areas using high-resolution stereoscopic satellite images of different epochs and a GIS database. Semi-global matching (SGM) is used to derive Digital Surface Models (DSM) and subsequently normalised digital surface models (nDSM, the difference of a DSM and a digital elevation model (DEM)), from the stereo pairs at each epoch. Large differences between the two DSMs are assumed to represent height changes. In order to reduce the effect of matching errors, heights in the nDSM of at least one epoch must also lie above a certain threshold in order to be considered as candidates for building change. A GIS database is used to check the existence of buildings at epoch 1. As a result of geometric discrepancies during data acquisition caused by different view directions and illumination conditions, the outlines of existing buildings do not necessarily match even in non-changed areas. Consequently, in the change map, there are streaking-shaped structures along the building outlines which do not correspond to actual changes. To eliminate these effects morphologic filtering is applied. The mask we use operates as a threshold on the shape and size of detected new blobs and effectively removes small objects such as cars, small trees and salt and pepper noise. The results of the proposed algorithm using IKONOS and GeoEye images demonstrate its performance for detecting 3D building changes and to extract building boundaries.

ASJC Scopus Sachgebiete

Zitieren

3D building change detection using high resolution stereo images and a GIS database. / Dini, G. R.; Jacobsen, K.; Rottensteiner, F. et al.
in: International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences - ISPRS Archives, Jahrgang 39, 01.08.2012, S. 299-304.

Publikation: Beitrag in FachzeitschriftKonferenzaufsatz in FachzeitschriftForschungPeer-Review

Dini, GR, Jacobsen, K, Rottensteiner, F, Al Rajhi, M & Heipke, C 2012, '3D building change detection using high resolution stereo images and a GIS database', International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences - ISPRS Archives, Jg. 39, S. 299-304. https://doi.org/10.5194/isprsarchives-XXXIX-B7-299-2012
Dini, G. R., Jacobsen, K., Rottensteiner, F., Al Rajhi, M., & Heipke, C. (2012). 3D building change detection using high resolution stereo images and a GIS database. International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences - ISPRS Archives, 39, 299-304. https://doi.org/10.5194/isprsarchives-XXXIX-B7-299-2012
Dini GR, Jacobsen K, Rottensteiner F, Al Rajhi M, Heipke C. 3D building change detection using high resolution stereo images and a GIS database. International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences - ISPRS Archives. 2012 Aug 1;39:299-304. doi: 10.5194/isprsarchives-XXXIX-B7-299-2012
Dini, G. R. ; Jacobsen, K. ; Rottensteiner, F. et al. / 3D building change detection using high resolution stereo images and a GIS database. in: International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences - ISPRS Archives. 2012 ; Jahrgang 39. S. 299-304.
Download
@article{f5ae8cd0c4cc479aa9b3c29419679f8f,
title = "3D building change detection using high resolution stereo images and a GIS database",
abstract = "In this paper, a workflow is proposed to detect 3D building changes in urban and sub-urban areas using high-resolution stereoscopic satellite images of different epochs and a GIS database. Semi-global matching (SGM) is used to derive Digital Surface Models (DSM) and subsequently normalised digital surface models (nDSM, the difference of a DSM and a digital elevation model (DEM)), from the stereo pairs at each epoch. Large differences between the two DSMs are assumed to represent height changes. In order to reduce the effect of matching errors, heights in the nDSM of at least one epoch must also lie above a certain threshold in order to be considered as candidates for building change. A GIS database is used to check the existence of buildings at epoch 1. As a result of geometric discrepancies during data acquisition caused by different view directions and illumination conditions, the outlines of existing buildings do not necessarily match even in non-changed areas. Consequently, in the change map, there are streaking-shaped structures along the building outlines which do not correspond to actual changes. To eliminate these effects morphologic filtering is applied. The mask we use operates as a threshold on the shape and size of detected new blobs and effectively removes small objects such as cars, small trees and salt and pepper noise. The results of the proposed algorithm using IKONOS and GeoEye images demonstrate its performance for detecting 3D building changes and to extract building boundaries.",
keywords = "Building, Change Detection, HR Satellite Images, Multitemporal, Three-dimensional, Urban Region",
author = "Dini, {G. R.} and K. Jacobsen and F. Rottensteiner and {Al Rajhi}, M. and C. Heipke",
year = "2012",
month = aug,
day = "1",
doi = "10.5194/isprsarchives-XXXIX-B7-299-2012",
language = "English",
volume = "39",
pages = "299--304",
note = "22nd Congress of the International Society for Photogrammetry and Remote Sensing, ISPRS 2012 ; Conference date: 25-08-2012 Through 01-09-2012",

}

Download

TY - JOUR

T1 - 3D building change detection using high resolution stereo images and a GIS database

AU - Dini, G. R.

AU - Jacobsen, K.

AU - Rottensteiner, F.

AU - Al Rajhi, M.

AU - Heipke, C.

PY - 2012/8/1

Y1 - 2012/8/1

N2 - In this paper, a workflow is proposed to detect 3D building changes in urban and sub-urban areas using high-resolution stereoscopic satellite images of different epochs and a GIS database. Semi-global matching (SGM) is used to derive Digital Surface Models (DSM) and subsequently normalised digital surface models (nDSM, the difference of a DSM and a digital elevation model (DEM)), from the stereo pairs at each epoch. Large differences between the two DSMs are assumed to represent height changes. In order to reduce the effect of matching errors, heights in the nDSM of at least one epoch must also lie above a certain threshold in order to be considered as candidates for building change. A GIS database is used to check the existence of buildings at epoch 1. As a result of geometric discrepancies during data acquisition caused by different view directions and illumination conditions, the outlines of existing buildings do not necessarily match even in non-changed areas. Consequently, in the change map, there are streaking-shaped structures along the building outlines which do not correspond to actual changes. To eliminate these effects morphologic filtering is applied. The mask we use operates as a threshold on the shape and size of detected new blobs and effectively removes small objects such as cars, small trees and salt and pepper noise. The results of the proposed algorithm using IKONOS and GeoEye images demonstrate its performance for detecting 3D building changes and to extract building boundaries.

AB - In this paper, a workflow is proposed to detect 3D building changes in urban and sub-urban areas using high-resolution stereoscopic satellite images of different epochs and a GIS database. Semi-global matching (SGM) is used to derive Digital Surface Models (DSM) and subsequently normalised digital surface models (nDSM, the difference of a DSM and a digital elevation model (DEM)), from the stereo pairs at each epoch. Large differences between the two DSMs are assumed to represent height changes. In order to reduce the effect of matching errors, heights in the nDSM of at least one epoch must also lie above a certain threshold in order to be considered as candidates for building change. A GIS database is used to check the existence of buildings at epoch 1. As a result of geometric discrepancies during data acquisition caused by different view directions and illumination conditions, the outlines of existing buildings do not necessarily match even in non-changed areas. Consequently, in the change map, there are streaking-shaped structures along the building outlines which do not correspond to actual changes. To eliminate these effects morphologic filtering is applied. The mask we use operates as a threshold on the shape and size of detected new blobs and effectively removes small objects such as cars, small trees and salt and pepper noise. The results of the proposed algorithm using IKONOS and GeoEye images demonstrate its performance for detecting 3D building changes and to extract building boundaries.

KW - Building

KW - Change Detection

KW - HR Satellite Images

KW - Multitemporal

KW - Three-dimensional

KW - Urban Region

UR - http://www.scopus.com/inward/record.url?scp=84924251797&partnerID=8YFLogxK

U2 - 10.5194/isprsarchives-XXXIX-B7-299-2012

DO - 10.5194/isprsarchives-XXXIX-B7-299-2012

M3 - Conference article

AN - SCOPUS:84924251797

VL - 39

SP - 299

EP - 304

JO - International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences - ISPRS Archives

JF - International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences - ISPRS Archives

SN - 1682-1750

T2 - 22nd Congress of the International Society for Photogrammetry and Remote Sensing, ISPRS 2012

Y2 - 25 August 2012 through 1 September 2012

ER -